Genuine Jeep Wagoneer Sway Bar Kit

Jeep Wagoneer Sway Bar Kit Parts Questions & Answers

• Bar-Rear SWAY
  52001135
  Q: How do you remove and install a rear stabilizer bar on a Jeep Wagoneer?

  A: To remove the sway bar kit, raise the rear of the vehicle and support it securely on jack stands. Then, unbolt the sway bar link at the spring tie plate and remove the kit. Inspect the brackets and bushings for wear and replace them if necessary. To install the sway bar kit, push the bushings and brackets onto the bar, position it against the frame, install the bracket bolts, and tighten them securely. Finally, connect the links to the spring tie plates and tighten them securely.
• Bar-Rear SWAY
  52001135
  Q: How do you remove the front stabilizer bar and stabilizer bar bushing?

  A: Apply the parking brake and lift the vehicle's front on jack stands. Remove the sway bar kit-to-link nuts, noting the positions of spacers, washers, and bushings. Unbolt the links from the axle brackets if needed. Remove the sway bar kit bracket bolts and detach the bar. Check the bushings for damage and replace if necessary. To reinstall, position the bushings on the bar and push the brackets over them. Raise the bar kit to the frame and install the bracket bolts loosely. Finally, install the bar kit-to-link nuts, washers, spacers, and bushings, and tighten securely.