Some of the covers can be easily scratched, be careful while removing them. First, remove the negative lead from the battery ground and twist it in the such a way that it cannot touch the terminal by any chance. Subsequently, disenclasp screws to the lower steering column cover; pull apart the covers beginning with the lower column cover, then the upper ones by Unscrewing the steering column cover Meanwhile, it is important to note, there is one small cover screw at the left hand side of the desired steering wheel, which must to be unbolted before taking off the particular cover. Last of, installation is the same process with removal only that instead of taking out the hardware, the operating system is loaded on the hardware.