18 Performance Axle Assembly found
-
Vehicle Specific
- Front and rear axle assemblies and hardware will provide next levelperformance for your vehicle
Product Specifications
Rear Axle tech ring and pinion set for production 44 Rubicon axle. Made from heat treated 8620 steel.This Part Fits
Jeep Wrangler 2018
-
Vehicle Specific
- Upgrade to the next level of Off-Road Performance. All axles are shipped with the current suspension mounting brackets installed. These axles are completely assembled.
Product Specifications
Front Axle Assembly is the same as the production Rubicon version. It features a 4:10 ratio and comes with electric lockers. It fits Jeep Wrangler (JL) vehicles equipped with four-wheel drive.This Part Fits
Jeep Wrangler 2018-2019
-
Vehicle Specific
- Upgrade to the next level of Off-Road Performance. All axles are shipped with the current suspension mounting brackets installed. These axles are completely assembled.
Product Specifications
Rear Axle Assembly is the same as the production Rubicon version. It features a 4:10 ratio. It fits Jeep Wrangler (JL) vehicles equipped with four-wheel drive.This Part Fits
Jeep Wrangler 2018-2019
-
Vehicle Specific
- Upgrade to the next level of Off-Road Performance.All axles are shipped with the current suspension mounting brackets installed.These axles are completely assembled.
Product Specifications
Dana 60 Crate Rear Axle with 4/88 gearing and electric locker with brakes. Due to the variety of vehicle configurations, Jeep® Performance Parts does not offer driveshafts for this conversion. See your local driveshaft servicer for proper shaft assemblies. These axles use 1350 driveshaft yokes and require wheels with eight lug nuts.This Part Fits
Jeep Wrangler 2007-2017
-
Vehicle Specific
- Upgrade to the next level of Off-Road Performance.All axles are shipped with the current suspension mounting brackets installed.These axles are completely assembled.
Product Specifications
Dana 60 Crate Rear Axle with 5/38 gearing and electric locker with brakes. Due to the variety of vehicle configurations, Jeep® Performance Parts does not offer driveshafts for this conversion. See your local driveshaft servicer for proper shaft assemblies. These axles use 1350 driveshaft yokes and require wheels with eight lug nuts.This Part Fits
Jeep Wrangler 2007-2017
-
Vehicle Specific
- Extreme heavy duty Differential Covers from Mopar® offer upgraded protection for your axle`s differential. Made from nodular castings, these covers provide increased strength and protect your differential from severe impacts such as rocks and off road obstacles. They also greatly enhance the rugged look of your axles. Each cover comes with exclusive Jeep® Brand vehicle badging.
Product Specifications
Dana 30 Heavy Ribbed Cast Iron Differential Cover, replaces the stock stamped steel coverThis Part Fits
Jeep Wrangler 2007-2017
-
Vehicle Specific
Discontinued
- Upgrade to the next level of Off-Road Performance.All axles are shipped with the current suspension mounting brackets installed.These axles are completely assembled.
Replaced by: P5153825AIProduct Specifications
Dana 44 Crate Axle, Front 4/10 with electric locking differential, does not include brakesThis Part Fits
Jeep Wrangler 2007-2017
-
Vehicle Specific
Discontinued
- Upgrade to the next level of Off-Road Performance.All axles are shipped with the current suspension mounting brackets installed.These axles are completely assembled.
Replaced by: P5153826AGProduct Specifications
Dana 44 Crate Axle, Rear 4/10 electric locking differential. Includes brakes.This Part Fits
Jeep Wrangler 2007-2017
-
Vehicle Specific
Discontinued
- Upgrade to the next level of Off-Road Performance.All axles are shipped with the current suspension mounting brackets installed.These axles are completely assembled.
Product Specifications
E-Locker Wiring Connector and Harness for DIY installation, Switch not includedThis Part Fits
Jeep Wrangler 2007-2017
-
Vehicle Specific
Discontinued
- Extreme heavy duty Differential Covers from Mopar® offer upgraded protection for your axle`s differential. Made from nodular castings, these covers provide increased strength and protect your differential from severe impacts such as rocks and off road obstacles. They also greatly enhance the rugged look of your axles. Each cover comes with exclusive Jeep® Brand vehicle badging.
Product Specifications
Dana 44 Heavy Ribbed Cast Iron Differential Cover, replaces the stock stamped steel coverThis Part Fits
Jeep Wrangler 2007-2017