How to replace front Crankshaft Seal in 3.3L and 3.8L V6 engine on 2008 Dodge Grand Caravan?

Remove the crankshaft pulley/vibration damper. Note how the seal is installed; the new one must be installed to the same depth and facing the same way. Carefully pry the oil seal out of the cover with a seal puller or a large screwdriver, taking care not to damage the crankshaft surface when removing the front seal. Avoid distorting the cover or scratching the crankshaft by wrapping tape around the tip of the screwdriver. Apply clean engine oil or multi-purpose grease to the outer edge of the new seal, then install it in the cover with the lip (spring side) facing inward. Drive the seal into place using a large deep socket and gently tap it with a hammer; if a large socket isn't available, a piece of pipe of the proper diameter will also work. Ensure the seal enters the bore squarely and stop when the front face is at the proper depth. Reinstall the vibration damper.

Genuine 2008 Dodge Grand Caravan Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Crankshaft Seals found

View related parts
2008 Dodge Grand Caravan RETAINER-CRANKSHAFT Rear Oil
Part Number: 4663870AB
$115.88 MSRP: $174.00
You Save: $58.12 (34%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil
- Position: Rear
- Replaced by: 4663870AC
- Item Weight: 1.00 Pounds
- Item Dimensions: 1.1 x 10.3 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663870AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- SXT | 6 Cyl 4.0L
View related parts
2008 Dodge Grand Caravan Crankshaft Oil Seal
Part Number: 4792317AB
$17.07 MSRP: $26.70
You Save: $9.63 (37%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Replaces: 4273275, 4792317
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.6 x 1.9 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- Base, C/V, Crew, EL, ES AWD, ES FWD, EX, Hero, LE AWD, LE FWD, SE, SE AWD, SE FWD, Sport AWD, Sport FWD, SXT, SXT AWD, SXT FWD | 4 Cyl 2.5L, 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 4.0L
View related parts
2008 Dodge Grand Caravan Crankshaft Oil Seal
Part Number: 4273275
$14.51 MSRP: $26.70
You Save: $12.19 (46%)
ADD TO CART
Product Specifications
- Other Name: Seal, Crankshaft Front Oil
- Replaced by: 4792317AB
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.6 x 1.9 x 1.8 inches
- Condition: New
- SKU: 4273275
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- Base, C/V, EL, ES AWD, ES FWD, EX, LE AWD, LE FWD, SE, SE AWD, SE FWD, Sport AWD, Sport FWD, SXT, SXT AWD, SXT FWD | 4 Cyl 2.5L, 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
2008 Dodge Grand Caravan Crankshaft Rear Oil Seal Retainer
Part Number: 68024410AA
$174.84 MSRP: $259.00
You Save: $84.16 (33%)
ADD TO CART
Product Specifications
- Other Name: RETAINER Crankshaft Rear Oil Seal
- Replaced by: 68024410AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.9 x 6.8 x 1.2 inches
- Condition: New
- SKU: 68024410AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- Crew, SXT
View related parts
2008 Dodge Grand Caravan Crankshaft Oil Seal
Part Number: 68029523AA
$33.96 MSRP: $48.90
You Save: $14.94 (31%)
Product Specifications
- Other Name: Seal Crankshaft Oil Front; Front Crank Seal, Front Seal
- Replaces: 68147500AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 4.2 x 0.5 inches
- Condition: New
- SKU: 68029523AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- SXT
View related parts
2008 Dodge Grand Caravan Crankshaft Rear Oil Seal Retainer
Part Number: 4654389AC
$33.20 MSRP: $47.65
You Save: $14.45 (31%)
Product Specifications
- Other Name: RETAINER Crankshaft Rear Oil Seal; Rear Main Seal Retainer
- Item Weight: 0.90 Pounds
- Item Dimensions: 11.3 x 10.4 x 0.8 inches
- Condition: New
- SKU: 4654389AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Grand Caravan Submodels:
- C/V, SE, SXT, SXT FWD | 6 Cyl 3.3L, 6 Cyl 3.8L

2008 Dodge Grand Caravan Crankshaft Seal

On our website, we proudly offer genuine 2008 Dodge Grand Caravan Crankshaft Seal at the market's great competitive prices. We are confident that choosing brand new OEM 2008 Dodge Grand Caravan Crankshaft Seal from our site will save you both trouble and money.

2008 Dodge Grand Caravan Crankshaft Seal Parts Questions & Experts Answers

Q: How to replace front Crankshaft Seal in 3.3L and 3.8L V6 engine on 2008 Dodge Grand Caravan?
A: Remove the crankshaft pulley/vibration damper. Note how the seal is installed; the new one must be installed to the same depth and facing the same way. Carefully pry the oil seal out of the cover with a seal puller or a large screwdriver, taking care not to damage the crankshaft surface when removing the front seal. Avoid distorting the cover or scratching the crankshaft by wrapping tape around the tip of the screwdriver. Apply clean engine oil or multi-purpose grease to the outer edge of the new seal, then install it in the cover with the lip (spring side) facing inward. Drive the seal into place using a large deep socket and gently tap it with a hammer; if a large socket isn't available, a piece of pipe of the proper diameter will also work. Ensure the seal enters the bore squarely and stop when the front face is at the proper depth. Reinstall the vibration damper.