How to remove and install a trunk lid, trunk lid support struts, and trunk lid latch on Chrysler 200?

To remove the trunk lid, first take off the trim panel fasteners and disconnect any attached cables. Mark around the hinge bolts for alignment. With assistance, remove the hinge bolts and lift off the lid. To install, reverse these steps. The Trunk Lid Lift Supports don't need removal for this process. If needed, prop open the lid, pry out the lift support locking caps and remove the supports. Replace supports as a pair, one side at a time. Reverse steps to install. For the latch, remove the trim panel, disconnect the electrical connector, remove the latch fasteners and the latch. Reverse steps to install.

Genuine Chrysler 200 Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Trunk Lid Lift Supports found

View related parts
Chrysler 200 Deck Lid Prop/Gas
Part Number: 5008938AC
$47.71 MSRP: $68.50
You Save: $20.79 (31%)
ADD TO CART
Product Specifications
- Other Name: Prop Deck Lid; Lift Cylinder
- Replaces: 5008938AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 200 | Limited Convertible, LX Convertible, S Convertible, Touring Convertible | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 PROP/GAS-DECKLID
Part Number: 5074535AC
$34.75 MSRP: $75.10
You Save: $40.35 (54%)
ADD TO CART
Product Specifications
- Other Name: Prop Deck Lid; Support Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 200 | Limited Sedan, LX Sedan, S Sedan, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chrysler 200 Deck Lid Prop/Gas
Part Number: 2AML4535AA
$15.96 MSRP: $22.90
You Save: $6.94 (31%)
ADD TO CART
Product Specifications
- Other Name: PROP/GAS-Deck Lid
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Chrysler 200 | Limited Sedan, LX Sedan, S Sedan, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 3.6L

Chrysler 200 Trunk Lid Lift Support

Chrysler 200 Trunk Lid Lift Support keeps the rear door lifted so you can load or unload cargo without holding the panel. Gas charged struts inside the support store compressed energy that pushes up when the Chrysler latch releases, so once the lid moves part way the cylinders finish the job and hold it firmly at full height. This Trunk Lid Lift Support balances the exact weight of the metal for smooth opening and light closing, delivering safety and convenience. Over time on any Chrysler 200 heat, cold, and countless cycles bleed off pressure, weakening the Trunk Lid Lift Support and letting the lid drift or slam. If the panel feels heavy or refuses to stay up in winter, the Trunk Lid Lift Support has likely aged out and needs swapping before it causes injury. Regular inspection on a Chrysler 200 ensures the Trunk Lid Lift Support remains strong, and replacement units for the 200 restore factory ease, keeping owners worry free.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler 200 Trunk Lid Lift Support at great affordable prices. Moreover, all genuine Chrysler 200 Trunk Lid Lift Support come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler 200 Trunk Lid Lift Support Parts Questions & Experts Answers

Deck Lid Prop/Gas
5008938AC
Q: How to remove and install a trunk lid, trunk lid support struts, and trunk lid latch on Chrysler 200?
A:
To remove the trunk lid, first take off the trim panel fasteners and disconnect any attached cables. Mark around the hinge bolts for alignment. With assistance, remove the hinge bolts and lift off the lid. To install, reverse these steps. The Trunk Lid Lift Supports don't need removal for this process. If needed, prop open the lid, pry out the lift support locking caps and remove the supports. Replace supports as a pair, one side at a time. Reverse steps to install. For the latch, remove the trim panel, disconnect the electrical connector, remove the latch fasteners and the latch. Reverse steps to install.