My Garage
My Account
Cart
Genuine Chrysler Cirrus Accelerator Cable
Choke Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Accelerator Cables found
Chrysler Cirrus Throttle Control Cable
Part Number: 5277832$37.65 MSRP: $47.91You Save: $10.26 (22%)
Chrysler Cirrus Accelerator Cable
The Chrysler Cirrus Accelerator Cable is a connection in the engine between the accelerator pedal and throttle plate in the engine air intake. This enables the action of the pedal to control the amount of air entering the engine and the amount of fuel flowing into it to be burned. The Accelerator Cable is made with a flexible steel core that slides into a low friction housing to ensure smooth movement and resistance to stretching. As the throttle plate is opened by the Accelerator Cable, more openings in the carburetor are opened, increasing the flow of fuel accordingly to the increased volume of air. When the pedal is released, a return spring causes the throttle plate to rotate closed and the Accelerator Cable goes back to its default position to restore a flow of air and fuel to idle. The Chrysler Cirrus Accelerator Cable is an essential part of the car that requires proper operation to facilitate smooth acceleration and ensure accurate engine reaction in Chrysler Cirrus models. Regular inspection ensures that the throttle control of Chrysler Cirrus is always consistent and the cable movement is not blocked.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Cirrus Accelerator Cable at great affordable prices. Moreover, all genuine Chrysler Cirrus Accelerator Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler Cirrus Accelerator Cable Parts Questions & Experts Answers
- Q: How do you remove and install the accelerator cable on Chrysler Cirrus?A:On four-cylinder engines, begin by removing the air cleaner assembly. Rotate the throttle valve cam to the full throttle position and disconnect the accelerator cable from the slot in the throttle valve cam, ensuring to detach it from the throttle lever at the Throttle Body. Next, compress the cable retaining tabs and push the accelerator cable out of the bracket. For V6 engines, compress the cable retaining tab and slide the cable out of the side of the bracket. Disconnect the accelerator cable from the bracket on the firewall. Inside the vehicle, at the accelerator pedal arm, use pliers to compress the cable retain clips and push the cable retainer out of the accelerator pedal arm, then slide the cable out of the slot in the pedal arm and remove it from inside the engine compartment. Finally, push the cable through the firewall into the engine compartment and remove it from the vehicle. Installation is the reverse of removal.
