My Garage
My Account
Cart
Genuine Chrysler Cirrus Steering Column Cover
Steering Column Cover Bezel- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Steering Column Covers found
Chrysler Cirrus Steering Column Shroud
Part Number: QH19SC8$56.09 MSRP: $80.25You Save: $24.16 (31%)
Chrysler Cirrus Steering Column Cover
The Chrysler Cirrus Steering Column Cover primarily conceals the steering shaft and wiring for a clean and comfortable cockpit. The molded panel fastens around the column. Owners of the Chrysler Cirrus appreciate how the two plastic halves join with simple fasteners, blocking rough metal edges and preventing distracting glare or rattles. Scratches and cracks of the Steering Column Cover will make the insides look shabby and affect the comfort level while driving. Hence, you should replace it as soon as possible. Chrysler Cirrus drivers will immediately see any damage on your car part, as it is exposed. Even small damage cannot go unnoticed. Over the years of production, the layout remained constant, so selecting a new Chrysler Cirrus Steering Column Cover is simply a matter of matching color and trim, not varying styles. A new Steering Column Cover prevents exposed wiring from being kicked and dirtied with dust. The Steering Column Cover secures the wheel area and restores its original finish.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Cirrus Steering Column Cover at great affordable prices. Moreover, all genuine Chrysler Cirrus Steering Column Cover come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler Cirrus Steering Column Cover Parts Questions & Experts Answers
- Q: How should you properly remove and install the covers to avoid damage on Chrysler Cirrus?A:These covers are somewhat fragile and can be scratched easily so be very careful when removing the covers. To install, first, it is necessary to disconnect the negative terminal and take it off the ground stud that is located on the left side of the shock tower. Then, with the top half of the dash now opened, slide the instrument cluster hood out of the way and lift out the knee bolster. Next, disconnect the two screws on the lower steering column cover and flip the covers; following, the removal of the screws in the lower ends of the cover, the covers can be detached from the steering column. For installation, one has to reverse the procedure of removal step by step.
