My Garage
My Account
Cart
Genuine Chrysler Sebring A/C Switch
Air Conditioning Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
18 A/C Switches found
Chrysler Sebring Air Conditioning And Heater Control
Part Number: 55111949AA$278.75 MSRP: $417.00You Save: $138.25 (34%)
Chrysler Sebring A/C And Heater Control Knob-Ro
Part Number: 4897713AA$6.92 MSRP: $8.80You Save: $1.88 (22%)
Chrysler Sebring Air Conditioning And Heater Control
Part Number: 5058100AD$284.26 MSRP: $424.00You Save: $139.74 (33%)
Chrysler Sebring Air Conditioner And Heater Control
Part Number: 4698199AF$667.83 MSRP: $1100.00You Save: $432.17 (40%)
Chrysler Sebring Air Conditioner And Heater Control
Part Number: 4698199AE$667.83 MSRP: $1100.00You Save: $432.17 (40%)
Chrysler Sebring Air Conditioning And Heater Control
Part Number: 4698199AB$667.83 MSRP: $1100.00You Save: $432.17 (40%)
Chrysler Sebring Air Conditioner And Heater Control
Part Number: 55111888AC$269.59 MSRP: $403.00You Save: $133.41 (34%)Chrysler Sebring Automatic Temperature Climate Control
Part Number: 5058269AD$134.23 MSRP: $199.00You Save: $64.77 (33%)
Chrysler Sebring A/C Switch
The Chrysler Sebring A/C Switch allows the driver to command the temperature within the cabin through a simple press or turn. It acts as the interface that tells the climate control module when the vehicle needs to cool or heat the atmosphere. The switch closes or opens a path to relays to the module, which activates the compressor, blower, and blend doors only when necessary. This saves fuel and prevents uncomfortable blasts of air. Chrysler A/C Switch on early models was quite simple. It was essentially a mechanical switch along with dash knobs. The knobs just completed the circuit. Later Chrysler models featured an A/C Switch that is built into their digital climate panel. This panel communicates to a power module, which adjusts blower speed from a near-infinite range. In the advanced Sebring systems, temperature sensors feed information on demand and the A/C Switch signals to go. The module automatically adjusts output. The Sebring A/C Switch is essentially the same, which means no matter what model your Chrysler or Sebring is, you will have exceptional control of the comfort in the cabin all year round.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring A/C Switch at great affordable prices. Moreover, all genuine Chrysler Sebring A/C Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler Sebring A/C Switch Parts Questions & Experts Answers
- Q: How to Replace the Heater/Air Conditioning Control Assembly on Chrysler Sebring?A:To replace the A/C switch on 2015 and later models, follow these steps, First, disconnect the negative battery cable from the remote ground terminal or battery. Carefully pry the A/C switch bezel assembly from the instrument panel, but avoid prying from the top on 2010 and earlier models to prevent damaging the retaining clips. Next, disconnect all electrical connectors from the back of the A/C switch assembly. Then, remove the mounting fasteners at each corner and take out the switch assembly from the bezel. For installation, reverse the removal steps. Note that if the A/C switch assembly is being replaced, calibration/diagnostic tests will be necessary, which require a specialized scan tool. For this service, take the vehicle to a dealer service department or other qualified repair shop.
