How to remove and install the front and rear bumper covers on Chrysler Sebring?

Disconnect the negative battery cable from the remote ground terminal or battery before beginning. On 2015 and later models, there are upper and lower plastic covers that need to be removed before all of the mounting bolts can be accessed. To remove the front bumper cover, release the hood latch and open the hood. Remove the fasteners attaching the grille to the radiator support. On 2014 and earlier models, remove the bolts holding the bumper cover to the headlight mounting panel at each side of the grille. Loosen the front wheel lug nuts, then raise the vehicle and support it securely on jackstands. Remove the front wheels. Remove the front inner fender splash shield fasteners as necessary to gain access to the front cover-to-fender bolts. Remove the fasteners securing the bottom of the bumper cover. Disconnect the fog light electrical connectors, if necessary. Disconnect the side marker light electrical connectors. Carefully remove the bumper cover from the vehicle. Installation is the reverse of removal. To remove the rear bumper cover, open the trunk. Raise the vehicle and support it securely on jackstands. Remove the upper mounting fasteners. Remove the fasteners securing the bottom of the bumper cover. Release the hooks on the sides of the bumper cover from the tabs in the rear cover brackets. Carefully remove the rear bumper cover from the vehicle. Installation is the reverse of removal.

Genuine Chrysler Sebring Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

51 Bumpers found

View related parts
Chrysler Sebring Front Bumper Cover
Part Number: 68004586AE
$475.38 MSRP: $696.00
You Save: $220.62 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Includes Absorber; Bumper Cover
- Position: Front
- Replaces: 68004586AD, 68004586AA, 68004586AB, 68004586AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Front Bumper Cover
Part Number: 68004586AC
$475.38 MSRP: $696.00
You Save: $220.62 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Includes Absorber
- Position: Front
- Replaced by: 68004586AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Front Bumper Cover
Part Number: 4805386AC
$73.87 MSRP: $426.00
You Save: $352.13 (83%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Primed
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Sebring | LX Sedan, LXi Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L
View related parts
Chrysler Sebring Rear Bumper Cover
Part Number: 68004597AC
$373.92 MSRP: $547.00
You Save: $173.08 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed
- Position: Rear
- Replaced by: 68004597AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Sebring | Limited Sedan, LX Sedan, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Rear Bumper Cover
Part Number: 4805449AC
$418.38 MSRP: $612.00
You Save: $193.62 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed; Bumper Cover
- Position: Rear
- Replaces: 4805449AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Sebring | Base Convertible, GTC Convertible, Limited Convertible, Touring Convertible | 4 Cyl 2.4L, 6 Cyl 2.7L
View related parts
Chrysler Sebring Front Bumper Cover
Part Number: 68004586AA
$475.38 MSRP: $696.00
You Save: $220.62 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Includes Absorber
- Replaced by: 68004586AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Rear Bumper Cover
Part Number: 68004596AC
$461.70 MSRP: $678.00
You Save: $216.30 (32%)
ADD TO CART
Product Specifications
- Other Name: FASCIA Rear Primed
- Replaced by: 68004596AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Sebring | Limited Sedan, LX Sedan, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Front Bumper Cover
Part Number: 68004594AD
$482.22 MSRP: $707.00
You Save: $224.78 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Includes Absorber; Bumper Cover
- Position: Front
- Replaces: 68004594AB, 68004594AA, 68004594AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Front Bumper Cover
Part Number: 68004594AB
$482.22 MSRP: $707.00
You Save: $224.78 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Includes Absorber
- Replaced by: 68004594AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Front Bumper Cover
Part Number: 68004594AA
$482.22 MSRP: $707.00
You Save: $224.78 (32%)
ADD TO CART
Product Specifications
- Other Name: Fascia Front Includes Absorber
- Position: Front
- Replaced by: 68004594AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Front Bumper Cover
Part Number: MR296446
$205.53 MSRP: $261.54
You Save: $56.01 (22%)
ADD TO CART
Product Specifications
- Other Name: Fascia-Front Bumper ; Face Package Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chrysler Sebring | LX, LXi | 6 Cyl 2.5L
View related parts
Chrysler Sebring Front Bumper Cover
Part Number: MR516340
Product Specifications
- Other Name: Bumper Fascia Front; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Sebring | LX, LXi | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring Face, Front Bumper (Primary Coat)
Part Number: MR208265
Product Specifications
- Other Name: Bumper Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chrysler Sebring | LX, LXi | 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Rear Bumper Cover
Part Number: MR990730
Product Specifications
- Other Name: Fascia-Rear Bumper ; Face Rr Bumper; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Base, Limited, LX, LXi | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring Front Bumper Cover
Part Number: MR990728
Product Specifications
- Other Name: Fascia-Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Base, Limited, LX, LXi | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring Rear Bumper Cover
Part Number: MR516342
Product Specifications
- Other Name: Bumper Fascia Rear; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Sebring | LX, LXi | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring Rear Bumper
Part Number: MR296450
Product Specifications
- Other Name: Fascia ; Face Package Rear Bumper; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chrysler Sebring | LXi | 6 Cyl 2.5L
View related parts
Chrysler Sebring Rear Bumper Cover
Part Number: MR208266
Product Specifications
- Other Name: Fascia Rear Bumper ; Face, Rear Bumper (Primary Coat); Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chrysler Sebring | LX, LXi | 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Rear Bumper
Part Number: MR178695
Product Specifications
- Other Name: Face Rear Bumper ; Fascia, Rear; Bumper Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chrysler Sebring | LX, LXi | 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Front Bumper
Part Number: MR178689
Product Specifications
- Other Name: Face-Front Bumper ; Fascia, Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chrysler Sebring | LX, LXi | 4 Cyl 2.0L, 6 Cyl 2.5L

| Page 1 of 3 |Next >

1-20 of 51 Results

Chrysler Sebring Bumper

The Chrysler Sebring Bumper is the first line of defense for the car and absorbs low-speed impacts to protect the sheet metal as well as its passengers. The front and rear Bumper are connected to the Sebring frame through a rigid support bar (inaccessible) beneath a molded plastic cover that conceals energy-absorbing foam or honeycomb inserts. The Chrysler panels in this layered configuration flex and spring back, spreading the impact before it reaches the mechanical parts. The layout is basically the same across the model years, but Sebring owners will encounter differences among trims, such as foam blocks on some trims and plastic honeycomb on others, chosen for cost, weight, and impact control. Whichever type of Bumper it may be, they are all designed to crumple predictably at parking speeds. This saves the skin and the bucks. Chrysler's philosophy advocates for ease of servicing. In fact, the replacement Bumper shells simply clip onto pre-set mounts, allowing drivers to restore a neat factory look without the use of complicated tools. By utilizing lightweight plastics and crushable cores, Chrysler Sebring design ensures that every Bumper offers reliable protection without bulking up the overall weight of the vehicle.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring Bumper at great affordable prices. Moreover, all genuine Chrysler Sebring Bumper come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Sebring Bumper Parts Questions & Experts Answers

Front Bumper Cover
68004586AE
Q: How to remove and install the front and rear bumper covers on Chrysler Sebring?
A:
Disconnect the negative battery cable from the remote ground terminal or battery before beginning. On 2015 and later models, there are upper and lower plastic covers that need to be removed before all of the mounting bolts can be accessed. To remove the front bumper cover, release the Hood Latch and open the hood. Remove the fasteners attaching the grille to the radiator support. On 2014 and earlier models, remove the bolts holding the bumper cover to the headlight mounting panel at each side of the grille. Loosen the front wheel lug nuts, then raise the vehicle and support it securely on jackstands. Remove the front wheels. Remove the front inner fender splash shield fasteners as necessary to gain access to the front cover-to-fender bolts. Remove the fasteners securing the bottom of the bumper cover. Disconnect the fog light electrical connectors, if necessary. Disconnect the side marker light electrical connectors. Carefully remove the bumper cover from the vehicle. Installation is the reverse of removal. To remove the rear bumper cover, open the trunk. Raise the vehicle and support it securely on jackstands. Remove the upper mounting fasteners. Remove the fasteners securing the bottom of the bumper cover. Release the hooks on the sides of the bumper cover from the tabs in the rear cover brackets. Carefully remove the rear bumper cover from the vehicle. Installation is the reverse of removal.