How do you remove and install the shift cable on Chrysler Sebring?

For replacement of a shift cable, shift the vehicle in to park then disconnect the negative battery cable from the remote ground terminal or battery. Release the shift cable from the shift lever by using a trim panel tool or flat bladed screwdriver and remove the bracket and pull the cable loose from its connection at the bracket. Pull the center console, and at the shifter assembly, give a pin and disconnect the shift cable housing at the clip as well as the cable at the bracket. Lift the car and put jackstands securely then, remove the grommet on the floor and pull the shift cable out of the hole. Loosen the cable gently from the retainers under the vehicle and then take it out. For installation the process is just the reverse of the above mentioned process to be followed where the grommet must be properly installed to make it a perfect fit and it must be lubricated in case required. For adjustment, the vehicle has to be parked in an open flat surface, the parking brake has to be engaged and the gear lever has to be shifted to the park mode before turning off the key. Tighten the shift cable adjustment lever bolt at the transaxle shift lever with the shift lever at the transaxle in the Park position, which engages the parking pawl. Further, turn the adjustment lever bolt to the stipulated torque setting, determine the smoothness of shifts, and guarantee the possibility of engine startup only in the Park/Neutral modes. Last, power the transaxle through all gear shift positions to test the shift control cable and adjust if required.

Genuine Chrysler Sebring Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Shift Cables found

View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: 5273214AE
$226.35 MSRP: $343.00
You Save: $116.65 (35%)
ADD TO CART
Product Specifications
- Other Name: Cable-Gearshift Control
- Replaced by: 5273214AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: 5273214AD
$226.35 MSRP: $343.00
You Save: $116.65 (35%)
ADD TO CART
Product Specifications
- Other Name: Cable-Gearshift Control
- Replaced by: 5273214AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: 4721942AB
$97.88 MSRP: $145.00
You Save: $47.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable-Gearshift Control
- Replaced by: 4721942AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | Limited Sedan, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: 4721942AA
$97.88 MSRP: $145.00
You Save: $47.12 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable Gearshift Control Will Include Grommet
- Replaced by: 4721942AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chrysler Sebring | Limited Sedan, LX Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Transmission Shift Cable/Automatic Transmission Shifter Cable
Part Number: 68037777AA
$154.54 MSRP: $231.00
You Save: $76.46 (34%)
ADD TO CART
Product Specifications
- Other Name: Cable-Gearshift Control
- Replaced by: 68105824AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | Limited Sedan, LX Sedan, Touring Convertible, Touring Sedan | 6 Cyl 2.7L, 6 Cyl 3.5L
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: 5106009AC
$221.26 MSRP: $350.00
You Save: $128.74 (37%)
ADD TO CART
Product Specifications
- Other Name: Cable-Gearshift Control
- Replaces: 5106009AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Sedan, Touring Sedan
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: 4578164AC
$97.33 MSRP: $113.00
You Save: $15.67 (14%)
ADD TO CART
Product Specifications
- Other Name: Cable-Gearshift Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Sebring | Base Convertible, GTC Convertible, Limited Convertible, Limited Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 6 Cyl 2.7L
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: 5106009AB
$234.62 MSRP: $350.00
You Save: $115.38 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable-Gearshift Control
- Replaced by: 5106009AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Sebring | Limited Convertible, Limited Sedan, LX Sedan, Touring Sedan
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: MB910537
Product Specifications
- Other Name: Cable, Gearshift Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chrysler Sebring | LX | 4 Cyl 2.0L
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: 4578165AA
Product Specifications
- Other Name: Cable-Gearshift Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Sedan, Touring Sedan | 4 Cyl 2.4L
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: MR580579
Product Specifications
- Other Name: Cable-Gearshift Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Limited, LX, LXi | 6 Cyl 3.0L
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: MR350809
Product Specifications
- Other Name: Cable-Gearshift Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Sebring | LX, LXi | 6 Cyl 3.0L
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: MR580636
Product Specifications
- Other Name: Cable-Gearshift Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Base, Limited, LX, LXi | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring Gear Shift Lock Cable
Part Number: MR377775
Product Specifications
- Other Name: Cable-Gearshift Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, Limited, LX, LXi | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: MR350810
Product Specifications
- Other Name: Cable-Gearshift Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4L
View related parts
Chrysler Sebring Shift Interlock Cable
Part Number: MR196687
Product Specifications
- Other Name: Cable-Gearshift Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, Limited, LX, LXi | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring Cable, Gearshift Control
Part Number: MB910538
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chrysler Sebring | LX | 4 Cyl 2.0L
View related parts
Chrysler Sebring Cable Gearshift Lock
Part Number: MB891353
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chrysler Sebring | LX, LXi | 6 Cyl 2.5L
- 1995-1996 Chrysler Sebring | LX, LXi | 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Cable Gearshift Lock
Part Number: MB891352
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chrysler Sebring | LX, LXi | 6 Cyl 2.5L
- 1995-1996 Chrysler Sebring | LX, LXi | 4 Cyl 2.0L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Transmission Gearshift Control Cable
Part Number: 4593485AA
Product Specifications
- Other Name: Cable-Gearshift Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chrysler Sebring | GTC Convertible | 6 Cyl 2.7L

| Page 1 of 2 |Next >

1-20 of 26 Results

Chrysler Sebring Shift Cable

The Chrysler Sebring Shift Cable permits the driver to operate the console shifter while giving accurate commands to the transmission that turns a hand motion into a positive engagement of gear for confident starts, smooth cruising, and safe parking. The cable connects the internal lever to the manual lever of the gearbox. It slides in a sheath, allowing the metal strands to push and pull with little clearance. The early Chrysler models of the Sebring line had rigid linkage rods to control transmission operation. Designers soon switched to a flexible Shift Cable to match front wheel drive layouts and free up cabin space. Mid-generation Chrysler convertibles and sedans retained that updated Shift Cable but received sturdier bushings to prevent looseness and jumping out of gear. The final-run Chrysler coupes were fitted with reinforced wire to minimize stretching that might occur with a Shift Cable under heavy daily use. The Shift Cable is an affordable but essential component. These enhancements result in faster shifts and a reduction in wrongly selected gears for all Sebring variants. Furthermore, a straightforward visual inspection for fraying or binding can inform Sebring owners to replace the item prior to a sudden failure.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring Shift Cable at great affordable prices. Moreover, all genuine Chrysler Sebring Shift Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Sebring Shift Cable Parts Questions & Experts Answers

Transmission Gearshift Control Cable
5273214AE
Q: How do you remove and install the shift cable on Chrysler Sebring?
A:
For replacement of a shift cable, shift the vehicle in to park then disconnect the negative battery cable from the remote ground terminal or battery. Release the shift cable from the shift lever by using a trim panel tool or flat bladed screwdriver and remove the bracket and pull the cable loose from its connection at the bracket. Pull the center console, and at the shifter assembly, give a pin and disconnect the shift cable housing at the clip as well as the cable at the bracket. Lift the car and put jackstands securely then, remove the grommet on the floor and pull the shift cable out of the hole. Loosen the cable gently from the retainers under the vehicle and then take it out. For installation the process is just the reverse of the above mentioned process to be followed where the grommet must be properly installed to make it a perfect fit and it must be lubricated in case required. For adjustment, the vehicle has to be parked in an open flat surface, the parking brake has to be engaged and the gear lever has to be shifted to the park mode before turning off the key. Tighten the shift cable adjustment lever bolt at the transaxle shift lever with the shift lever at the transaxle in the Park position, which engages the parking pawl. Further, turn the adjustment lever bolt to the stipulated torque setting, determine the smoothness of shifts, and guarantee the possibility of engine startup only in the Park/Neutral modes. Last, power the transaxle through all gear shift positions to test the shift control cable and adjust if required.