Two
Brake Caliper assemblies are used in different models, made by Continental Teves and TRW. They are not interchangeable. Before replacing brake pads, remove some fluid from the master cylinder reservoir. Loosen lug nuts, raise the vehicle, remove wheels, and work on one brake at a time. Clean the caliper, push the piston back, replace brake pads, inspect the caliper and disc, and lubricate guide pins. Repeat for the other wheel, reinstall wheels, lower the vehicle, tighten lug nuts, refill brake fluid, pump the brake pedal, and check fluid level. Test brakes before normal use. The process is similar for rear brakes.