My Garage
My Account
Cart
Genuine Dodge Nitro Antenna
Radio Antenna- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
16 Antennas found
Dodge Nitro Base Cable And Bracket Antenna
Part Number: 5064252AB$77.83 MSRP: $125.00You Save: $47.17 (38%)
Dodge Nitro Base Cable And Bracket Antenna
Part Number: 5064252AD$77.83 MSRP: $125.00You Save: $47.17 (38%)
Dodge Nitro Base Cable And Bracket Antenna
Part Number: 5064252AC$77.83 MSRP: $125.00You Save: $47.17 (38%)
Dodge Nitro Base Cable And Bracket Antenna
Part Number: 5064771AB$91.20 MSRP: $149.00You Save: $57.80 (39%)
Dodge Nitro Base Cable And Bracket Antenna
Part Number: 5064861AC$175.97 MSRP: $271.00You Save: $95.03 (36%)
Dodge Nitro Global Positioning Antenna
Part Number: 5064187AA$88.50 MSRP: $105.00You Save: $16.50 (16%)
Dodge Nitro Antenna
The Dodge Nitro Antenna lets drivers tune in to clear radio signals, keeping entertainment and traffic updates steady on every trip. Acting as the vital bridge between electromagnetic waves in the air and the receiver hidden in the dash, in every Dodge, this Antenna turns broadcast energy into the electric current the sound system needs, and it can reverse the process whenever transmission is required for remote components. Built from conductive segments arranged to capture waves that travel in every horizontal direction, the standard Antenna setup is considered omnidirectional, a smart choice because Nitro cabins often move through varied city and highway landscapes. Company literature for Dodge also highlights a shorter roof whip option that trims wind noise without losing reach, proving the Antenna can balance style and function. Earlier wireless pioneers showed that adding reflectors could create directional focus, and that lesson shaped premium Nitro packages in select years. Throughout its production run, Dodge kept the mounting straightforward, allowing the Antenna to resist weather, survive car wash brushes, and remain an unobtrusive accent on the bold Nitro profile.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Nitro Antenna at great affordable prices. Moreover, all genuine Dodge Nitro Antenna come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Nitro Antenna Parts Questions & Experts Answers
- Q: How can the antenna be replaced equipped with a grid-type antenna and optional satellite radio on Dodge Nitro?A:Some later models come with an integral type grid type two piece antenna sited on the right rear quarter glass which must be replaced with the glass and therefore must be repaired in a glass works. Furthermore, optional satellite radio is offered after some later models using a small antenna placed on the rear aspect of the roof. To remove the antenna, unbend the cable from the negative terminal board and unbolt the mast off the fitting situated on the right side stern. Take out the cover, nut and the bezel fitting, go ahead and take the right kick panel, also disconnect the splice of the cable present in the kick panel section. Pull a string or a length of wire along the antenna cable; take out the top fender bolts, and the bolts near the top door hinge of the rear fender. Delicately unscrew the upper rear corner of the fender to develop accessibility of the antenna in addition to cutting the string and pulling out the antenna cable from the car. Screw a cable end to the new cable and using the string, pull the cable into the interior. The rest of the steps are done in a mirrored sequence to the removal steps. For models from 2008 or later or for ones that are equipped with satellite radio the antenna can be removed by lifting the headliner at the rear of the interior which may be difficult due to the delicate nature of the headliner and would therefore best be removed by a professional. Remember to unscrew the electrical cable from the bottom of the car antennas, and loosen the two locating tabs that hold the antennas on roof with the use of a small screw driver to remove the reverse of installation.
