My Garage
My Account
Cart
Genuine Dodge Nitro Back Up Light Switch
Reverse Light Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Back Up Light Switch found
Dodge Nitro Back Up Light Switch
The function of using the Back Up Light Switch in Dodge Nitro vehicle is very basic or simply and that is to complete the circuit to turn on the reverse lights whenever the vehicle is in reverse gear. This switch work by making an electric current circuit from the power source to the reverse lights so as to provide visibility to the rear when reversing. How the Dodge Nitro Back Up Light Switch is engaged can differ depending on the design of the car and its transmission it can be done mechanically or via hydraulics. Over the period of constructing Dodge nitro vehicles the back up light switches may end up varying in design, and this type of switch might be a different design from the other. Such differences are primarily attributed to the type of actuation mechanisms incorporated in the switch that impacts on the switch's reliability and response. In general, the Dodge Nitro Back Up Light Switch is quite essential for reverse purposes and adjusts to the car's engineering necessities.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Nitro Back Up Light Switch at great affordable prices. Moreover, all genuine Dodge Nitro Back Up Light Switch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Nitro Back Up Light Switch Parts Questions & Experts Answers
- Q: What is the location of the Back Up Light Switch and How to check it on Dodge Nitro?A:The back-up light switch is located on the left side of the transmission case. To check its functionality, turn the ignition key to the On position and move the shift lever to Reverse; the back-up lights should illuminate. If they do not, first check the back-up light fuse, and if it is blown, trace the circuit for a short-circuit condition. If the fuse is intact, raise the vehicle securely on jackstands and place the shifter in Reverse. While working under the vehicle, unplug the back-up light switch electrical connector and use an ohmmeter to check for continuity across the switch terminals; continuity should be present, and if not, the switch needs replacement. If continuity exists, check for voltage at the electrical connector; one terminal should have battery voltage with the ignition key in the On position. If no voltage is detected, trace the circuit between the fuse block and the electrical connector for an open circuit. If voltage is present, trace the back-up light circuit between the electrical connector and the back-up light bulbs for any open circuit issues, keeping in mind that both bulbs could potentially be burned out. For replacement, raise the vehicle securely on jackstands if not already done, unplug the back-up light switch electrical connector, and unscrew the switch from the transmission case. Apply RTV sealant or Teflon tape to the threads of the new switch to prevent leakage, install it in the transmission case, and tighten securely before plugging in the electrical connector. Finally, lower the vehicle and check the operation of the back-up lights.
