Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center

Genuine Jeep Cherokee Manual Transmission Extension Housing Seal

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Manual Transmission Extension Housing Seal found

  • Jeep Cherokee Manual Transmission Extension Housing Seal - 4058047
    Diagram for Jeep Cherokee Manual Transmission Extension Housing Seal - 4058047
    View related parts

    Jeep Cherokee Seal-TRANS.EXT.TO YOKE

    Part Number: 4058047
    $29.71 MSRP: $42.75
    You Save: $13.04 (31%)
    ADD TO CART
    Product Specifications
    • Other Name: Oil Seal, w/Long Extension, A727
    • Replaced by: 5003408AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 1994-1996 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 4WD | 4 Cyl 2.5L

Jeep Cherokee Manual Transmission Extension Housing Seal

Jeep Cherokee Manual Transmission Extension Housing Seal keeps gearbox fluid inside the tailshaft, sealing the driveshaft slip yoke and protecting the transmission from damage caused by heat and wear when oil levels drop. The Manual Transmission Extension Housing Seal is designed to fit snugly around the yoke on one side with a flexible lip that seals leaks while retaining lubricant and preventing leakage of lubricant applied for cooling. The seal works with an extension housing bushing that centers the shaft, so when the bushing wears, the yoke wobbles, and even a new Manual Transmission Extension Housing Seal will seep. Smart Jeep Cherokee drivers replace both pieces together. The Cherokee manuals have always applied a common simple single-lip elastomer Manual Transmission Extension Housing Seal design. The only variation comes in the requirement for the exact diameter and depth, not in function. Fluid stains can be difficult to trace, which is why owners often scrub the case clean, run the vehicle, or add a fluorescent dye. This makes it easier for owners to find a faulty Manual Transmission Extension Housing Seal before damage occurs. After all, who wouldn't want a classic Jeep Cherokee that shifts like new? With Jeep durability, you know you're getting something built to last.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Cherokee Manual Transmission Extension Housing Seal at great affordable prices. Moreover, all genuine Jeep Cherokee Manual Transmission Extension Housing Seal come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Cherokee Manual Transmission Extension Housing Seal Parts Questions & Experts Answers

  • Jeep Cherokee Manual Transmission Extension Housing Seal - 4058047 Seal-TRANS.EXT.TO YOKE Seal-TRANS.EXT.TO YOKE
    4058047
    Q: How to replace the Manual Transmission Extension Housing Seal and O-rings on Jeep Cherokee?
    A:
    Oil leaks frequently occur due to wear of the extension housing oil seal or the speedometer drive gear oil seal and 0-ring. Replacement of these seals is relatively easy, since the repairs can usually be performed without removing the transmission or transfer case (4WD models) from the vehicle. The extension housing oil seal is located at the extreme rear of the transmission or transfer case, where the driveshaft is attached. If leakage at the seal is suspected, raise the vehicle and support it securely on jackstands. If the seal is leaking, transmission lubricant will be built up on the front of the driveshaft and may be dripping from the rear of the transmission or transfer case. Remove the driveshaft using a soft-faced hammer to tap and remove the dust shield (if equipped) from the transmission. Carefully pry the oil seal out of the rear of the transmission or transfer case, making sure not to damage the splines on the transmission output shaft. If the oil seal cannot be removed with a screwdriver or pry bar, a special oil seal removal tool may be required. Use a large section of pipe or a very large deep socket as a drift to install the new oil seal, driving it into the bore squarely and ensuring it is completely seated. Reinstall the dust shield by tapping it into place and lubricate the splines of the transmission output shaft and the outside of the driveshaft sleeve yoke with lightweight grease before installing the driveshaft. Be careful not to damage the lip of the new seal. To check for leaks in the speedometer cable and driven gear housing, look for transmission oil around the cable housing. Disconnect the speedometer cable and mark the relationship of the speedometer adapter to the extension housing. Remove the bolt and withdraw the adapter, then install a new 0-ring and adapter seal on the adapter and reinstall the adapter and cable assembly on the extension housing. Use a small screwdriver to remove the O-ring from the groove and lift the adapter seal from the inside of the housing.

Related Jeep Cherokee Parts

Browse by Year

+
1996 Manual Transmission Extension Housing Seal 1995 Manual Transmission Extension Housing Seal 1994 Manual Transmission Extension Housing Seal