How to rebuild a wheel cylinder on Jeep Cherokee?

New wheel cylinders are available, which makes this job quite easy. If it's decided to rebuild the wheel cylinder, make sure that a rebuild kit is available before proceeding. Never overhaul only one wheel cylinder always rebuild both of them at the same time. Raise the rear of the vehicle and support it securely on jackstands. Block the front wheels to keep the vehicle from rolling. Remove the brake shoe assembly. Remove all dirt and foreign material from around the wheel cylinder. Completely loosen the brake line fitting, then remove the two wheel cylinder mounting bolts. Don't pull the brake line away from the wheel cylinder. Remove the wheel cylinder mounting bolts. Detach the wheel cylinder from the brake backing plate and place it on a clean work bench. Immediately plug the brake line to prevent fluid loss and contamination. If the brake shoe linings are contaminated with brake fluid, install new brake shoes. Remove the bleeder screw, piston cups, pistons, boots and expander assembly from the wheel cylinder body. Clean the wheel cylinder with brake fluid or brake system cleaner. Use compressed air to remove excess fluid from the wheel cylinder and to blow out the passages. Check the cylinder bore for corrosion and score marks. Crocus cloth can be used to remove light corrosion and stains, but the cylinder must be replaced with a new one if the defects cannot be removed easily, or if the bore is scored. Lubricate the new cups with brake fluid. Assemble the wheel cylinder components. Make sure the recessed sides of the cups face in. Place the wheel cylinder in position and install the bolts. Connect the brake line and tighten the fitting. Install the brake shoe assembly. Bleed the brakes. Check brake operation before driving the vehicle in traffic.

Genuine Jeep Cherokee Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wheel Cylinders found

View related parts
Jeep Cherokee WHEELCYLINDER-Wheel
Part Number: V2103601AA
Product Specifications
- Other Name: Cylinder, Wheel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-2000 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 2 Door Sport Utility RHD 2WD, 2 Door Sport Utility RHD 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD, Classic 4 Door 2WD, Classic 4 Door 4WD, Limited 4 Door 2WD, Limited 4 Door 4WD, SE 2 Door 2WD, SE 2 Door 4WD, SE 4 Door 2WD, SE 4 Door 4WD, SE RHD 4 Door 2WD, SE RHD 4 Door 4WD, Sport 2 Door 2WD, Sport 2 Door 4WD, Sport 4 Door 2WD, Sport 4 Door 4WD | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 4 Cyl 2.5L Diesel, 6 Cyl 4.0L
View related parts
Jeep Cherokee WHEELCYLINDER-Wheel
Part Number: V2103056AA
Product Specifications
- Other Name: Cylinder, Wheel Brake, Complete
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Jeep Cherokee | Classic 4 Door 2WD, Classic 4 Door 4WD, Limited 4 Door 2WD, Limited 4 Door 4WD, SE 2 Door 2WD, SE 2 Door 4WD, SE 4 Door 2WD, SE 4 Door 4WD, SE RHD 4 Door 2WD, SE RHD 4 Door 4WD, Sport 2 Door 2WD, Sport 2 Door 4WD, Sport 4 Door 2WD, Sport 4 Door 4WD | 4 Cyl 2.5L, 6 Cyl 4.0L
- 1990-1996 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 2 Door Sport Utility RHD 2WD, 2 Door Sport Utility RHD 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 4 Cyl 2.5L Diesel, 6 Cyl 4.0L
View related parts
Jeep Cherokee Wheel Cylinder
Part Number: 4313056
Product Specifications
- Other Name: Cylinder, Wheel Brake, Complete; Wheel Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Jeep Cherokee | Classic 4 Door 2WD, Classic 4 Door 4WD, Limited 4 Door 2WD, Limited 4 Door 4WD, SE 2 Door 2WD, SE 2 Door 4WD, SE 4 Door 2WD, SE 4 Door 4WD, SE RHD 4 Door 2WD, SE RHD 4 Door 4WD, Sport 2 Door 2WD, Sport 2 Door 4WD, Sport 4 Door 2WD, Sport 4 Door 4WD | 4 Cyl 2.5L, 6 Cyl 4.0L
- 1990-1996 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 2 Door Sport Utility RHD 2WD, 2 Door Sport Utility RHD 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 4 Cyl 2.5L Diesel, 6 Cyl 4.0L
View related parts
Jeep Cherokee Wheel Cylinder
Part Number: 4423601
Product Specifications
- Other Name: Cylinder, Wheel; Wheel Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-2000 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 2 Door Sport Utility RHD 2WD, 2 Door Sport Utility RHD 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD, Classic 4 Door 2WD, Classic 4 Door 4WD, Limited 4 Door 2WD, Limited 4 Door 4WD, SE 2 Door 2WD, SE 2 Door 4WD, SE 4 Door 2WD, SE 4 Door 4WD, SE RHD 4 Door 2WD, SE RHD 4 Door 4WD, Sport 2 Door 2WD, Sport 2 Door 4WD, Sport 4 Door 2WD, Sport 4 Door 4WD | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 4 Cyl 2.5L Diesel, 6 Cyl 4.0L

Jeep Cherokee Wheel Cylinder

The Wheel Cylinder in Jeep Cherokee vehicles is especially a component of the hydraulic drum brake system whose function is to push the brake shoes against the brake drum with a view of making effective stopping. It works through a system in which hydraulic force eases out the pistons within the cylinder thus pulling the shoes closer to the drum. Jeep Cherokee models have various cast iron and aluminum wheel cylinders, Some of the new models prefer aluminum due to issues of rusting. With time, the Wheel Cylinder may therefore corrode and consequently develop leaks that may hamper the braking system of the vehicles. This is particularly important on cars that are being serviced for new brake shoes where the thicker of linings may push the pistons deeper in to the bore thereby leading to leaks. It is usually possible to repair wheel cylinders numerous times but it is wise to replace them in case of severe damage for better performance in Jeep Cherokee vehicles.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Cherokee Wheel Cylinder at great affordable prices. Moreover, all genuine Jeep Cherokee Wheel Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Cherokee Wheel Cylinder Parts Questions & Experts Answers

Wheel Cylinder
4313056
Q: How to rebuild a wheel cylinder on Jeep Cherokee?
A:
New wheel cylinders are available, which makes this job quite easy. If it's decided to rebuild the wheel cylinder, make sure that a rebuild kit is available before proceeding. Never overhaul only one wheel cylinder always rebuild both of them at the same time. Raise the rear of the vehicle and support it securely on jackstands. Block the front wheels to keep the vehicle from rolling. Remove the brake shoe assembly. Remove all dirt and foreign material from around the wheel cylinder. Completely loosen the Brake Line fitting, then remove the two wheel cylinder mounting bolts. Don't pull the brake line away from the wheel cylinder. Remove the wheel cylinder mounting bolts. Detach the wheel cylinder from the brake backing plate and place it on a clean work bench. Immediately plug the brake line to prevent fluid loss and contamination. If the brake shoe linings are contaminated with brake fluid, install new brake shoes. Remove the bleeder screw, piston cups, pistons, boots and expander assembly from the wheel cylinder body. Clean the wheel cylinder with brake fluid or brake system cleaner. Use compressed air to remove excess fluid from the wheel cylinder and to blow out the passages. Check the cylinder bore for corrosion and score marks. Crocus cloth can be used to remove light corrosion and stains, but the cylinder must be replaced with a new one if the defects cannot be removed easily, or if the bore is scored. Lubricate the new cups with brake fluid. Assemble the wheel cylinder components. Make sure the recessed sides of the cups face in. Place the wheel cylinder in position and install the bolts. Connect the brake line and tighten the fitting. Install the brake shoe assembly. Bleed the brakes. Check brake operation before driving the vehicle in traffic.