How to remove and install the Door Handle, Door Latch Assembly, and Door Lock Cylinder on a Jeep Comanche?

Remove the door trim panel and water shield. Remove the door window glass. Remove the access plug in the end of the door. Remove the three door latch retaining screws from the end of the door, disconnect the links, then remove the latch and solenoid. On power door locks, it will be necessary to drill out the rivets retaining the solenoid to the door. Installation is the reverse of removal. Tighten the door latch retaining screws securely. Disconnect the link from the lock cylinder. Use pliers to slide the retaining clip off and remove the lock cylinder from the door. Installation is the reverse of removal. After installation, check the latch link free play by pressing the door handle release button in. Check that the latch link starts to move after the button moves about 1/64-inch. If necessary, loosen the adjusting screw on the latch, adjust the free play and then retighten it. Remove the retaining nuts, pull the handle out, detach the control rod and remove the handle from the door. Installation is the reverse of removal. Tighten the retaining nuts securely.

Genuine Jeep Comanche Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Door Handles found

View related parts
Jeep Comanche Handle, Remote Control, Right
Part Number: 55002183
Product Specifications
- Other Name: Handle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1986-1992 Jeep Comanche | 3-Person Cab 2WD, 3-Person Cab 4WD | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.0L
View related parts
Jeep Comanche Front Door Exterior Handle
Part Number: 55024927
Product Specifications
- Other Name: Handle, Exterior; Handle Outside
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1992 Jeep Comanche | 3-Person Cab 2WD, 3-Person Cab 4WD | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 4.0L
View related parts
Jeep Comanche Handle-Door Outside-RH(Black)
Part Number: 55024926
Product Specifications
- Other Name: Handle, Exterior; Handle Outside
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1992 Jeep Comanche | 3-Person Cab 2WD, 3-Person Cab 4WD | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 4.0L

Jeep Comanche Door Handle

The Jeep Comanche Interior Door Handle is quite important for it offers Jeeps occupants an opportunity to open the door and get out. This is a small one that works by releasing the door hook that is from the latch that is known to open the door similar to the exterior handle. Gradually, the Jeep Comanche's Interior Door Handle will degrade as they will be subjected to usage hence making the driver's side handle less aesthetic as they will be scratched. Although the overview does not differentiate between various types or designs of the Interior Door Handles found on Jeep Comanche automobiles it is wise to fully service the handles in order to optimize their functionality. Problems can also be present with the door latch assembly which would lead to problems with the locking mechanism and cause irritation. Jeep Comanche Interior Door Handle is one of the components that deserve the attention to its productivity and aesthetical appearance of the car's interior.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Comanche Door Handle at great affordable prices. Moreover, all genuine Jeep Comanche Door Handle come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Comanche Door Handle Parts Questions & Experts Answers

Handle, Remote Control, Right
55002183
Q: How to remove and install the Door Handle, Door Latch Assembly, and Door Lock Cylinder on a Jeep Comanche?
A:
Remove the door trim panel and water shield. Remove the door window glass. Remove the access plug in the end of the door. Remove the three door latch retaining screws from the end of the door, disconnect the links, then remove the latch and solenoid. On power door locks, it will be necessary to drill out the rivets retaining the solenoid to the door. Installation is the reverse of removal. Tighten the door latch retaining screws securely. Disconnect the link from the lock cylinder. Use pliers to slide the retaining clip off and remove the lock cylinder from the door. Installation is the reverse of removal. After installation, check the latch link free play by pressing the door handle release button in. Check that the latch link starts to move after the button moves about 1/64-inch. If necessary, loosen the adjusting screw on the latch, adjust the free play and then retighten it. Remove the retaining nuts, pull the handle out, detach the control rod and remove the handle from the door. Installation is the reverse of removal. Tighten the retaining nuts securely.