My Garage
My Account
Cart
Genuine Jeep Comanche Door Lock Cylinder
Door Lock Cylinder Tumbler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Door Lock Cylinders found
Jeep Comanche Cylinder - Door Lock Uncoded
Part Number: 4720931$28.44 MSRP: $45.70You Save: $17.26 (38%)
Jeep Comanche Door Lock Cylinder
Jeep Comanche autos have the Door Lock Cylinder in front doors as it offers the locking and unlocking of the automobiles using keys present in the car. This mechanism will allow users to ensure a secure access to the interior compartments of the vehicle while at the same time allow easy usage of the control mechanism thereof. Wear may also occur at the Door Lock Cylinder over time due to its constant use in the operations of the car doors, the car may develop a hard time locking or unlocking the doors and a key may be stuck at this part. It is evident that, in most proportions, the Jeep Comanche has applied basic door lock cylinders, but variations might differ with the model year. The access control utilised in the Jeep Comanche involves the Door Lock Cylinder, in which routine servicing and replacement is crucial for the proper functioning and security of the doors of the vehicle.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Comanche Door Lock Cylinder at great affordable prices. Moreover, all genuine Jeep Comanche Door Lock Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Comanche Door Lock Cylinder Parts Questions & Experts Answers
- Q: How to remove and install the Door Handle, Door Latch Assembly, and Door Lock Cylinder on a Jeep Comanche?A:Remove the door trim panel and water shield. Remove the door window glass. Remove the access plug in the end of the door. Remove the three door latch retaining screws from the end of the door, disconnect the links, then remove the latch and solenoid. On power door locks, it will be necessary to drill out the rivets retaining the solenoid to the door. Installation is the reverse of removal. Tighten the door latch retaining screws securely. Disconnect the link from the lock cylinder. Use pliers to slide the retaining clip off and remove the lock cylinder from the door. Installation is the reverse of removal. After installation, check the latch link free play by pressing the door handle release button in. Check that the latch link starts to move after the button moves about 1/64-inch. If necessary, loosen the adjusting screw on the latch, adjust the free play and then retighten it. Remove the retaining nuts, pull the handle out, detach the control rod and remove the handle from the door. Installation is the reverse of removal. Tighten the retaining nuts securely.
