Genuine Jeep Patriot Brake Master Cylinder

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

  • Diagram for Jeep Patriot Brake Master Cylinder - 5175093AA
    View related parts
    Product Specifications
    • Other Name: Cylinder-Brake
    • Replaced by: 5175093AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2007-2016 Jeep Patriot | Base 4WD, Base FWD, Latitude 4WD, Latitude FWD, Latitude X 4WD, Latitude X FWD, Limited 4WD, Limited FWD, Sport 4WD, Sport FWD | 4 Cyl 2.0L, 4 Cyl 2.4L

Jeep Patriot Brake Master Cylinder

Brake Master Cylinder is the component of Jeep Patriot vehicles' braking system which, through the mechanical correlation of the driver's foot depression, generates hydraulic pressure, which work the brake system slave cylinder. This mechanism work through expanding the hydraulic fluid at the base of calipers or drum brakes to make sufficient friction to stop the vehicle. Jeep Patriot models usually come with dual circuit master cylinders, which means that even if one of the circuits is not working properly, there is the other which can bring about the braking. The Brake Master Cylinder can be of different construction, some of them have been fitted with an integral type fluid reservoir while others have an external fluid reservoir made of nylon or plastic. These variations may influence maintenance and possible leakage, as outer tanks are susceptible to cracking of the reservoirs.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Brake Master Cylinder at great affordable prices. Moreover, all genuine Jeep Patriot Brake Master Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Patriot Brake Master Cylinder Parts Questions & Experts Answers

  • Q: How to remove and install a Brake Master Cylinder on Jeep Patriot?
    A:
    First of all, cover all body parts to avoid brake fluid damage. Disconnect the battery cable, pump the brake pedal, remove the air filter housing, and siphon the brake fluid. Detach the fluid hose, disconnect the brake fluid level switch connector, and loosen the Brake Line fittings. Remove the brake master cylinder from the power booster. Bench bleed the new brake master cylinder, install a new vacuum seal, and mount it on the power Brake Booster. Tighten the brake line fittings and mounting nuts. Fill the reservoir and bleed the system. Test the brakes before use.

Related Jeep Patriot Parts