My Garage
My Account
Cart
Genuine Jeep Patriot Camshaft
Cam- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Camshafts found
Jeep Patriot Engine Intake Camshaft
Part Number: 4884735AC$220.22 MSRP: $459.00You Save: $238.78 (53%)
Jeep Patriot Engine Exhaust Camshaft
Part Number: 4884736AC$219.41 MSRP: $457.00You Save: $237.59 (52%)
Jeep Patriot Engine Exhaust Camshaft
Part Number: 4884736AB$219.41 MSRP: $457.00You Save: $237.59 (52%)
Jeep Patriot Engine Intake Camshaft
Part Number: 4884735AB$220.22 MSRP: $459.00You Save: $238.78 (53%)
Jeep Patriot Engine Intake Camshaft
Part Number: 68111216AA$266.43 MSRP: $565.00You Save: $298.57 (53%)
Jeep Patriot Engine Intake Camshaft
Part Number: 68089055AA$386.46 MSRP: $565.00You Save: $178.54 (32%)
Jeep Patriot Camshaft
The camshaft used in Jeep Patriot cars is a mechanical encoder which is responsible for the performance of the engine's intake and exhaust valves through controlling the opening and closing of the required valves to allow the air/fuel mixture to enter the cylinder for combustion and outlet of exhaust gases. These configurations possibly include Over Head Valve (OHV), Single Over Head Cam (SOHC), and Double Over Head Cam (DOHC) and is usually made of iron or steel, Jeep Patriot camshaft. Each affects the engine in a different manner, DOHC lets intake and exhaust be controlled independently thus making it efficient. Jeep Patriot camshafts are typically, factory or rebuilt, or performance ones which are built with the specific aim of achieving the set target performance levels. Some of these specifications include lift, duration, and the lobe separation angle also abbreviated as LSA play an essential role in defining the effect of the camshaft on the behaviour of the engine regarding torque and idle. Therefore the camshaft plays the key role in timing the operations of the valves per the momenta of the pistons and is a key determinant of the performance of the Jeep Patriot.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Camshaft at great affordable prices. Moreover, all genuine Jeep Patriot Camshaft come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Patriot Camshaft Parts Questions & Experts Answers
- Q: What are the steps, precautions, and tools required for removing and reinstalling camshafts and Lash Adjuster on Jeep Patriot?A:Some care should be taken here as the timing system is a bit intricate and any mistake is likely to result in serious damage to the engine; it is strongly advised that only experts attempt this; where there is any doubt regarding ability, professional advice should be sought. All work should be checked for accuracy before the engine has been started again. The camshafts do not necessarily require the removal of the Timing Chain cover and the timing chain; although it has to be done if the necessary tools for removing the camshafts are not available. First and foremost, the engine cover has to be disconnected and then the negative , battery cable; a nut to the right front wheel has to be unscrewed; the vehicle should be raised on the jack stands, the right front wheel and the drivebelt splash shield to be extracted. After then, drain the engine oil and coolant and remove the drivebelt and the ignition coils and spark plugs and finally take off the valve cover. Turn the crankshaft until electrode No.1 is at TDC on its compression stroke and be sure that timing mark is aligned when timing chain is reinstalled, mark the camshaft phasers for their proper reassembly. Free the timing chain tensioner plug and pop up the plunger ratchet with the help of a pick, and to keep this ratchet, the special tool must be inserted. Slide in a chain holding tool between the two camshaft phasers, this is to ensure that during the phaser removal the holding tool is left in place to avoid 'unlocking' of the timing chain. The camshaft bearing caps are to be marked for right and left so that each one of them can be put in place in the proper direction and the bolts are to be loosened in the sequence in which they were tightened but in a reverse order. Take off the front camshaft bearing cap together with the remaining ones: first lift the intake camshaft upward and then, fix the chain to prevent from dropping. Remove the lower bearing from the exhaust camshaft journal and loosen and remove the bolt that holds the phaser on the camshaft and mark the Lash Adjusters so that you know in which position they go back in from which they come out. Check the condition of the camshaft bearing surfaces and the Lash Adjusters and, in the case of damage, replace the piece. This done by turning the crankshaft manually prior to starting the engine at least two revolutions and feel for any resistance. Screw the phasers onto the camshafts so that the marks face each other and tighten the bolts to the recommended turning moment. Submerge the Lash Adjusters in clean engine oil and then place them back in their proper position; it is also prime time to lubricate the camshaft bearing journals and lobes as well. Align the timing chain over the exhaust phaser sprocket and position the machined scribe lines parallel to the gasket surface, then install the camshafts over Cylinder Head. There should now be no turn on the camshaft and so tighten the camshaft bearing cap and bolts in the manner prescribed with the camshaft bearing cap bolts to the specified torque. Make sure that all the marks are aligned, then, remove the Allen wrench and the holding tool of the chain, and turn the engine for two times to ensure that the marks on the camshaft are lined up. Last, apply antiseize on the timing chain tensioner plug then tighten it and end the process in the reverse taking down manner.
