My Garage
My Account
Cart
Genuine Jeep Patriot Coil Springs
Strut Spring- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
83 Coil Springs found
Jeep Patriot Front Suspension-Coil Spring
Part Number: 5105867AD$108.51 MSRP: $163.00You Save: $54.49 (34%)Jeep Patriot Front Coil Spring Left
Part Number: 5105868AD$96.36 MSRP: $146.00You Save: $49.64 (34%)
Jeep Patriot Front Coil Spring Right
Part Number: 5105865AD$83.53 MSRP: $126.00You Save: $42.47 (34%)Jeep Patriot Front Coil Spring Left
Part Number: 5105866AD$108.51 MSRP: $163.00You Save: $54.49 (34%)
| Page 1 of 5 |Next >
1-20 of 83 Results
Jeep Patriot Coil Springs
Jeep Patriot cars have coil springs as part of their suspension systems in which they provide support for the body weight of the automobile and also act as shock absorbers for rough roads. These coil springs assist in maintaining, ride height that crucial for, Correct alignment of the wheels and, tire wear. It becomes easy to realize that the coil springs have worn out depending on signs such as sagging, bottoming out and the like. In the previous years, Jeep Patriot models have used different coil springs which include linear rate, progressive and dual rate springs. Linear rate springs have the same rate throughout the range while progressive springs afford a more comfortable ride with higher rates when the load is high. Two-level rate springs come with two different relative stiffness for improved performance in different driving conditions. Furthermore, variable coil springs can be obtained here since the outstanding point of the car is the possibility to set the height according to wheel and tire sizes. Jeep Patriot coil offers a remarkable contribution to the car's balance besides providing enjoyable ride to the driver and the passengers.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Coil Springs at great affordable prices. Moreover, all genuine Jeep Patriot Coil Springs come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Patriot Coil Springs Parts Questions & Experts Answers
- Q: How to disassemble and reassemble the Coil Springs and Shock Absorber on the strut assembly of a Jeep Patriot?A:A spring compressor is necessary for this procedure and can be rented from auto parts stores or equipment rental yards. Before starting any work, explore all options if the struts or coil springs show signs of wear. If a problem develops with the strut body, it must be replaced. However, complete strut assemblies may be available on an exchange basis. Check the cost and availability of parts before disassembling the vehicle. To begin the disassembly process, remove the strut and spring assembly. Mount the strut clevis bracket portion in a vise and mark the components for reassembly. Install the spring compressor on the spring and compress it to relieve pressure from the upper mount. Loosen the shaft nut while holding the damper shaft from turning. Remove the nut and upper mount, inspecting the pivot bearing and upper spring seat for damage. Lift the compressed spring from the assembly and remove the dust boot from the damper shaft. Slide the rubber bumper off the damper shaft and check the lower spring isolator for damage. To reassemble, extend the damper rod and install the rubber bumper and dust boot. Carefully place the coil spring onto the damper, aligning it with reference marks. Install the upper spring isolator and seat, followed by the upper mount. Tighten the nut on the damper shaft. Loosen the coil spring compressor and remove it once the top coil is properly seated. Finally, install the strut/spring assembly.
