My Garage
My Account
Cart
Genuine Jeep Wagoneer A/C Accumulator
Accumulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 A/C Accumulators found
Jeep Wagoneer A/C Accumulator
The A/C Accumulator plays a vital part in acting as afilter within vehicles that are Jeep Wagoneer since it helps to filter moisture, oil as well as debris on the air conditioning system. Located between the evaporator and the compressor, the A/C Accumulator plays a pivotal role of enhancing the performance of the cooling system. There have been numerous styles of A/C Accumulators used on the Jeep Wagoneer models since the car manufacturers intended to boost the car's performance and its reliability. The primary purpose varies slightly between these kinds, as to retain this, the air needs to be dry the air must be kept clean and free of moisture for the cooling to be effective. The variation may be in its design or material that may be attributed to the earlier developments in technology and the changes in vehicular systems. In general, the A/C Accumulator is one of the main components of the Jeep Wagoneer's climate control system that helps drivers avoid discomfort during the journey.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Wagoneer A/C Accumulator at great affordable prices. Moreover, all genuine Jeep Wagoneer A/C Accumulator come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Wagoneer A/C Accumulator Parts Questions & Experts Answers
- Q: How to remove and replace the A/C Accumulator in an air conditioning system on Jeep Wagoneer?A:To begin, discharge the air conditioning system and disconnect the negative battery cable. Then, unplug the electrical connector from the pressure switch near the top of the receiver-drier. Disconnect the refrigerant line from the receiver-drier, using a backup wrench to prevent twisting the tubing. Make sure to plug the open fittings to prevent dirt and moisture from entering. Next, remove the receiver-drier by loosening the mounting bracket bolts or clamping band screw, depending on the model. If a new receiver-drier is being installed, remove the Schrader valve and pour out the oil, noting the amount. Add fresh refrigerant oil to the new receiver-drier, equal to the amount removed from the old unit plus one ounce. Finally, reverse the removal process for installation and take the vehicle back to the shop for evacuation, charging, and leak testing of the A/C system.
