How to remove and install the door handle, door latch assembly, and door lock cylinder on a Jeep Wagoneer?

Remove the door trim panel and water shield. Remove the door window glass. Remove the access plug in the end of the door. Remove the three door latch retaining screws from the end of the door, disconnect the links, then remove the latch and solenoid. On power door locks, it will be necessary to drill out the rivets retaining the solenoid to the door. Installation is the reverse of removal. Tighten the door latch retaining screws securely. Disconnect the link from the lock cylinder. Use pliers to slide the retaining clip off and remove the lock cylinder from the door. Installation is the reverse of removal. After installation, check the latch link free play by pressing the door handle release button in. Check that the latch link starts to move after the button moves about 1/64-inch. If necessary, loosen the adjusting screw on the latch, adjust the free play and then retighten it. Remove the retaining nuts, pull the handle out, detach the control rod and remove the handle from the door. Installation is the reverse of removal. Tighten the retaining nuts securely.

Genuine Jeep Wagoneer Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Door Lock Cylinders found

View related parts
Jeep Wagoneer Cylinder Lock-Bright
Part Number: J8122874
$23.99 MSRP: $30.52
You Save: $6.53 (22%)
ADD TO CART
Product Specifications
- Other Name: Cylinder, Door Lock, Uncoded; Cylinder & Keys, Key Cylinder, Lock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1990 Jeep Wagoneer | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.0L, 6 Cyl 4.2L
View related parts
Jeep Wagoneer Cylinder-Door Lock Assembly
Part Number: 68519266AA
$35.53 MSRP: $50.90
You Save: $15.37 (31%)
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Wagoneer | 6 Cyl 3.0 L GAS, 8 Cyl 5.7 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wagoneer Cylinder-Door Lock(UNCODED)-Black
Part Number: 83505067
Product Specifications
- Other Name: Cylinder, Door; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Jeep Wagoneer | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 4.0L, 6 Cyl 4.2L
View related parts
Jeep Wagoneer Cylinder-Lock Assembly-LIFTDOOR-INCL.2 K
Part Number: 83510179
Product Specifications
- Other Name: Cylinder, Liftgate; Cylinder & Keys, Lock Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1990 Jeep Wagoneer | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.0L, 6 Cyl 4.2L
View related parts
Jeep Wagoneer Cylinder, Liftgate
Part Number: 83505068
Product Specifications
- Other Name: Cylinder & Keys
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Jeep Wagoneer | 4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 4.0L, 6 Cyl 4.2L

Jeep Wagoneer Door Lock Cylinder

This lock is found mostly in Jeep Wagoneer cars and plays the vital role of locking and unlocking the doors of the car by use of a car key. This component is normally fitted on the front doors to ensure that only the authorized person or people can unlock the interior of the car. Modern vehicles are manufactured without door lock cylinders but Jeep Wagoneer car has this mechanism which is very important in guarding cars from theft. Unnotify, the Door Lock Cylinder may wear out and become problematic to use because of the numerous times it gets used like a key that can't rotate in the lock. Jeep Wagoneer owners should pay attention to the status of your Door Lock Cylinder and where possible replace it when some of the signs of failure are observable, in order to have a smooth operation of the doors.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Wagoneer Door Lock Cylinder at great affordable prices. Moreover, all genuine Jeep Wagoneer Door Lock Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Wagoneer Door Lock Cylinder Parts Questions & Experts Answers

Cylinder Lock-Bright
J8122874
Q: How to remove and install the door handle, door latch assembly, and door lock cylinder on a Jeep Wagoneer?
A:
Remove the door trim panel and water shield. Remove the door window glass. Remove the access plug in the end of the door. Remove the three door latch retaining screws from the end of the door, disconnect the links, then remove the latch and solenoid. On power door locks, it will be necessary to drill out the rivets retaining the solenoid to the door. Installation is the reverse of removal. Tighten the door latch retaining screws securely. Disconnect the link from the lock cylinder. Use pliers to slide the retaining clip off and remove the lock cylinder from the door. Installation is the reverse of removal. After installation, check the latch link free play by pressing the door handle release button in. Check that the latch link starts to move after the button moves about 1/64-inch. If necessary, loosen the adjusting screw on the latch, adjust the free play and then retighten it. Remove the retaining nuts, pull the handle out, detach the control rod and remove the handle from the door. Installation is the reverse of removal. Tighten the retaining nuts securely.