Genuine Jeep Wagoneer Intake Valve

Jeep Wagoneer Intake Valve Parts Questions & Experts Answers

• Intake Valve
  33003515
  Q: What is the recommended process for performing a valve job on the Exhaust Valve and Intake Valve and preparing the cylinder head for reinstallation on Jeep Wagoneer?

  A:

  Because of the complex nature of the job and the special tools and equipment needed, servicing of the valves, the valve seats and the valve guides, commonly known as a valve job, should be done by a professional. The home mechanic can remove and disassemble the head(s), do the initial cleaning and inspection, then reassemble and deliver it (or them) to a dealer service department or an automotive machine shop for the actual service work. Doing the inspection will enable you to see what condition the head and valve train components are in and will ensure that you know what work and new parts are required when dealing with an automotive machine shop. The dealer service department, or automotive machine shop, will remove the valves and springs, recondition or replace the valves and valve seats, recondition the valve guides, check and replace the valve springs, spring retainers or rotators and keepers (as necessary), replace the valve seals with new ones, reassemble the valve components and make sure the installed spring height is correct. The cylinder head gasket surface will also be resurfaced if it's warped. After the valve job has been performed by a professional, the head will be in like-new condition. When the head is returned, be sure to clean it again before installation on the engine to remove any metal particles and abrasive grit that may still be present from the valve service or head resurfacing operations. Use compressed air, if available, to blow out all the oil holes and passages.