My Garage
My Account
Cart
Genuine Jeep Wrangler Wheel Cylinder
Brake Wheel Cylinder- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Wheel Cylinders found
Jeep Wrangler Wheel Cylinder
Jeep Wrangler automobiles are equipped with a hydraulic drum brake system where the Wheel Cylinder plays a critical role of applying pressure on the brake shoes for proper stopping of the car. It works through a procedure whereby hydraulic pressure acts on some pistons inside the cylinder thus forcing the shoes against the drum. Jeep Wrangler Wheel Cylinders have also changed from the older cast iron types to today's aluminum type which does not rust and is durable. Throughout the years countless varieties of Wheel Cylinders have been used and some even included dual single-piston arrangement. Regardless of the design, the primary function remains the same: in order to attain safe and sound braking operation. It is imperative to perform frequent check-ups and servicing because when the brake system possesses pin holes or corrotes, then it weakens the grinding force. Another important recommendation during servicing of brake shoes is replacement of Wheel Cylinder in your Jeep Wrangler vehicles to ensure maximum performance.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Wrangler Wheel Cylinder at great affordable prices. Moreover, all genuine Jeep Wrangler Wheel Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Wrangler Wheel Cylinder Parts Questions & Experts Answers
- Q: How to remove and install a wheel cylinder on Jeep Wrangler?A:Before removing the wheel cylinder the following steps should be taken; With the help of a jack place the rear of the car in the air and support it with jack stands and block the front wheels so that they do not move. Second, in order to inspect the brake shoe assembly, it has to be unbolted and all the dirt and other foreign material should be wiped off from around the wheel cylinder. Back out the fitting nuts enough to release the Brake Line fitting from the wheel cylinder but do not pull it away from the cylinder, back out the two cylinder mounting bolts. Subsequently remove the wheel cylinder from the brake backing plate, and set it aside on another clean stand, ensure that you plugged the brake line to avoid loss of the fluid and gain of contaminants. The linings of the brake shoe are normally affected by the brake fluid and in this case new brake shoes should be fitted. For assembly the wheel cylinder is placed in the correct position, bolts are then fitted in the wheel cylinder followed by connecting the brake line and torquing the fitting before finally fitting the brake shoe assembly. Last, evacuate the brake fluid and examine the brake system before testing movement of the vehicle in traffic.
