How to Disconnect the CMP Sensor(s) from My Dodge Ram 2500 and Ram 2500?

First of all, disconnect the cable(s) from the negative battery terminal(s). For HEMI, disconnect the electrical connector from the CMP sensor and remove the sensor mounting bolt. Remove the O-ring and inspect. Apply oil on the O-ring and install the sensor. Installation is the reverse of removal.

Genuine Ram 2500 Camshaft Position Sensor

Cam Position Sensor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

4 Camshaft Position Sensors found

View related parts
Ram 2500 Sensor-CRANKSHAFT/CAMSHAFT POSITIO
Part Number: 5179099AA
- Other Name: Sensor Crankshaft/Camshaft Position
- Replaced by: 68526830AA
$165.29 MSRP: $229.00
You Save: $63.71 (28%)

Add to Cart
More Info
Fits the following Vehicles:
2011 Ram 2500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 6 Cyl 6.7L Diesel
Less Info
View related parts
Ram 2500 Sensor-CAMSHAFT
Part Number: 5149054AC
- Other Name: Sensor Camshaft; Camshaft Position Sensor, Camshaft Sensor
- Replaces: 5149054AA, 5149054AB
$19.70 MSRP: $29.10
You Save: $9.40 (33%)

Add to Cart
More Info
Fits the following Vehicles:
2011-2020 Ram 2500 | Big Horn Crew Cab 2WD, Big Horn Crew Cab 4WD, Big Horn Mega Cab 4WD, Big Horn Reg Cab 2WD, Big Horn Reg Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Limited Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, Powerwagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Reg Cab 2WD, Tradesman Reg Cab 4WD | 8 Cyl 5.7L, 8 Cyl 5.7L CNG, 8 Cyl 6.4L
Less Info
View related parts
Ram 2500 Sensor-CRANKSHAFT/CAMSHAFT POSITIO
Part Number: 5179099AB
- Other Name: Sensor Crankshaft/Camshaft Position
- Replaced by: 68526830AA
$103.38 MSRP: $229.00
You Save: $125.62 (55%)

Add to Cart
More Info
Fits the following Vehicles:
2012-2018 Ram 2500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 6 Cyl 6.7L Diesel
Less Info
View related parts
Ram 2500 Sensor-Position
Part Number: 68447685AA
- Other Name: Camshaft Position Sensor
- Replaced by: 68581416AA
$78.93 MSRP: $105.00
You Save: $26.07 (25%)

Add to Cart
More Info
Fits the following Vehicles:
2019-2020 Ram 2500 | Big Horn Crew Cab 2WD, Big Horn Crew Cab 4WD, Big Horn Mega Cab 4WD, Big Horn Reg Cab 2WD, Big Horn Reg Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Limited Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Reg Cab 2WD, Tradesman Reg Cab 4WD | 6 Cyl 6.7L Diesel
Less Info

Ram 2500 Camshaft Position Sensor Parts Questions & Answers

Sensor-CRANKSHAFT/CAMSHAFT POSITIO
5179099AA
Q: How to Disconnect the CMP Sensor(s) from My Dodge Ram 2500 and Ram 2500?
A: First of all, disconnect the cable(s) from the negative battery terminal(s). For HEMI, disconnect the electrical connector from the CMP sensor and remove the sensor mounting bolt. Remove the O-ring and inspect. Apply oil on the O-ring and install the sensor. Installation is the reverse of removal.