How to remove and replace the driveshaft assembly and Driveshaft center support bearing in a Ram 2500?

Lift the vehicle and secure on jack stands. Remove the driveshaft assembly and mark its front and rear portions. Loosen the slip-joint boot clamp, pull back the boot, and remove the rear driveshaft from the center bearing. Take the front driveshaft and center bearing to a machine shop for bearing replacement. Reinstall in reverse order, ensuring match marks align for correct driveshaft phasing.

Genuine Ram 2500 Driveshaft Center Support Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Driveshaft Center Support Bearings found

View related parts
Ram 2500 Drive Shaft Bearing
Part Number: 68065263AA
$219.38 MSRP: $329.00
You Save: $109.62 (34%)
ADD TO CART
Product Specifications
- Other Name: Bearing Kit Drive Shaft; Bearing
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ram 2500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD | 6 Cyl 6.7L Diesel, 8 Cyl 5.7L
View related parts
Ram 2500 Drive Shaft Bearing
Part Number: 68451004AA
$122.63 MSRP: $184.00
You Save: $61.37 (34%)
ADD TO CART
Product Specifications
- Other Name: Bearing-Drive Shaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ram 2500 | Big Horn Crew Cab 2WD, Big Horn Crew Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD | 6 Cyl 6.7L Diesel, 8 Cyl 6.4L
View related parts
Ram 2500 Drive Shaft Bearing
Part Number: 68065237AA
$165.38 MSRP: $248.00
You Save: $82.62 (34%)
ADD TO CART
Product Specifications
- Other Name: Bearing Kit Drive Shaft; Bearing
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ram 2500 | Laramie Crew Cab 2WD, Laramie Mega Cab 2WD, Longhorn Crew Cab 2WD, Longhorn Mega Cab 2WD, SLT Crew Cab 2WD, SLT Mega Cab 2WD, SLT Regular Cab 2WD, ST Crew Cab 2WD, ST Regular Cab 2WD | 6 Cyl 6.7L Diesel
View related parts
Ram 2500 Drive Shaft Bearing
Part Number: 68450997AA
$94.84 MSRP: $143.00
You Save: $48.16 (34%)
ADD TO CART
Product Specifications
- Other Name: Bearing-Drive Shaft; Center Bearing
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2024 Ram 2500 | Big Horn Crew Cab 2WD, Big Horn Reg Cab 2WD, Laramie Crew Cab 2WD, Limited Crew Cab 2WD, Longhorn Crew Cab 2WD, Tradesman Crew Cab 2WD, Tradesman Reg Cab 2WD | 6 Cyl 6.7 L DIESEL, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L

Ram 2500 Driveshaft Center Support Bearing

A Ram 2500 Driveshaft Center Support Bearing stabilizes and steadies a two-piece shaft so engine torque reaches the rear axle without shudder or shake. The Driveshaft Center Support Bearing connects the front and rear parts of the long shaft to the frame when the shaft length is too long for a single tube, allowing both halves to rotate while the suspension moves. The simple but effective design has a sealed bearing that holds the shaft and absorbs vibration inside a housing lined with rubber to keep noise down. The Ram 2500 of yesteryear and now has the same configuration with the modified Driveshaft Center Support Bearing joints. Standard builds rely on single cardan universal joints. Tow packages may upgrade to double cardan joints for reduced pulsation at sharper angles. 4WD editions add a Rzeppa style velocity joint for articulation. Routine lubrication on Ram 2500 joints helps the Driveshaft Center Support Bearing last the life of the truck. No matter what the joint style, the Driveshaft Center Support Bearing is the fixed center point that sustains balance and protects other driveline components in every Ram 2500.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 2500 Driveshaft Center Support Bearing at great affordable prices. Moreover, all genuine Ram 2500 Driveshaft Center Support Bearing come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Ram 2500 Driveshaft Center Support Bearing Parts Questions & Experts Answers

Drive Shaft Bearing
68065263AA
Q: How to remove and replace the driveshaft assembly and Driveshaft center support bearing in a Ram 2500?
A:
Lift the vehicle and secure on jack stands. Remove the driveshaft assembly and mark its front and rear portions. Loosen the slip-joint boot clamp, pull back the boot, and remove the rear driveshaft from the center bearing. Take the front driveshaft and center bearing to a machine shop for bearing replacement. Reinstall in reverse order, ensuring match marks align for correct driveshaft phasing.