My Garage
My Account
Cart
Genuine Ram 2500 Fender
Wheel Fender- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
16 Fenders found
Ram 2500 Fender
Ram 2500 Fender is the first line of defense of the truck against rocks, sand, water and other road spray thrown up by rotating tires while allowing air to glide smoothly along the wheel. The Fender incorporates rigid panels along the curves of its body, which not only absorb low-speed impacts but also prevent damage to the more expensive sheet metal. Across different 2500 model years, two styles of Fender are apparent. The front quarter panels hug the leading wheel wells while the rear quarter panels contour to the back wheels. They both aim to manage airflow. Regular contact with rain, snow and road salt can chip paint and build up rust, so it is not uncommon to see a swapped-out Fender on a damaged Ram truck to keep looks and shielding intact. By choosing the correct year, make, model and panel location, you ensure a precise fit for every Ram. Moreover, adhering to these basics enables each generation of 2500 to keep debris off pedestrians and vehicles. Any Ram 2500 is ensured road ready with this original Fender design in place.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 2500 Fender at great affordable prices. Moreover, all genuine Ram 2500 Fender come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Ram 2500 Fender Parts Questions & Experts Answers
- Q: How to remove and install fender on Ram 2500?A:Raise the vehicle, support it securely on jack stands and remove the front wheel. Remove the antenna if required. Remove the headlight. With the door open, remove the top rearmost fender bolt. The top rear fender bolt is accessible with the door open. Remove the front bumper fascia. Remove the front wheel opening molding if one is installed. Remove the inner fender splash shield. Remove the pin retainers from the inner fender splash shield and the lower rear section of the fender. Remove the two bolts from the lower rear part of the fender. Working inside the wheel opening, remove the bolts from the center rear part of the fender. Remove the inner fender splash shield to reach this fender bolt and the two at the front of the fender and the front mounting bracket. On models with fender-mounted batteries, remove the battery and the battery tray. Remove the four bolts from the top inner edge of the fender. There are four bolts along the top edge of the fender don't forget the one at the extreme rear. Detach the fender. It's a good idea to have an assistant support the fender while it's being moved away from the vehicle to prevent damage to the surrounding body panels. Installation is the reverse of removal.
