My Garage
My Account
Cart
Genuine Ram 2500 Hood Cable
Hood Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Hood Cables found
Ram 2500 Hood Cable
The Ram 2500 Hood Cable is the important part that the driver can use to pop the hood. A flexible steel line runs from the inside release handle to the dual latches at the front, translating a simple pull motion into latch movement so that the panel can lift. The crucial Hood Cable assembly is concealed but important. The earlier edition of the Ram 2500 deployed a single routed Hood Cable that fed a splitter block that transferred motion to twin short leads. Later trucks continued with this same layout but applied stronger sheathing that resists cracking and moisture intrusion, which are the two big enemies of smooth operation. Whether a 2023 or 2000, the system is simple and relies on tension integrity rather than electronics so that a frayed strand or stretched section will stop functioning and the hood will be stuck shut. A worn Hood Cable should be replaced because it diminishes the light lever feel that drivers expect from their Ram. Every 2500 requires hood safety checks and repairs. A replacement cable requires no effortful manipulations; simply swap the mechanical component. Keeping an eye on the Hood Cable on any Ram 2500 prevents surprise failures and maintains confidence.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 2500 Hood Cable at great affordable prices. Moreover, all genuine Ram 2500 Hood Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Ram 2500 Hood Cable Parts Questions & Experts Answers
- Q: How to remove and install a hood latch and cable on Ram 2500?A:Scribe a line around the latch to aid alignment when reinstalling the latch assembly. Remove the latch retaining bolts securing the latch to the radiator support and remove the latch. Disconnect the hood release cable by disengaging the cable from the back of the latch assembly. Installation is the reverse of the removal procedure. Adjust the latch so the hood engages securely when closed and the hood bumpers are slightly compressed. Remove the hood latch, then detach the cable from the latch. Working in the engine compartment, detach the cable from all of its retaining clips. It may be necessary to cut some of the clips to free the cable. Working under the instrument panel, remove the screws and detach the hood release handle. Dislodge the grommet and pull the cable through the firewall and into the cab to remove it. Pull the new cable through the firewall and into the engine compartment. Seat the grommet in the firewall. The remainder of installation is the reverse of removal.
