Chrysler 68089521AA Rear Suspension Bar

Make sure both rear wheels are loose, lift rear tire using jack, and place two jackstands under the car to support it. Take off the tires last. On each side, remove the top cap nut from the link to lift off the Sway Bar Kit from its place; if the ball nut rotates while you are doing this, use an Allen key to hold it in place. Unbolt the bushing brackets from the Sway Bar Kit, take those brackets away, and carefully yank out the entire bar. First step, put the bar over the crossmember. Then reconnect the bolts, and afterward tighten both stabilizer links into place. Put the wheels and lug nuts in place, let the car down, then tighten the lug nuts.