Chrysler 5154199AG Bearing Brake

Use high-temperature wheel bearing grease to pack the bearings, working it thoroughly into the components. Apply a thin coat of grease to the spindle at various points. Put grease on the inner side of each bearing race inside the hub and create a dam with your finger. Place the grease-packed inner bearing into the hub's rear, add more grease to the outer side, and install a new dust seal.

Remove the four bolts securing the hub and bearing assembly to the knuckle. Clean the mounting surfaces and install a new assembly. Lubricate the CV joint seal and hub grease seal, as well as the CV joint wear sleeve and seal contact surface with multi-purpose grease. Carefully position the knuckle and hub assembly, align the splines, and slide the hub into place. Install knuckle-to-strut bolts, camber cam, washer plate, and nuts, followed by the balljoint pinch bolt and nut. Adjust the camber cam's position and tighten the nuts.