Chrysler 1UP56DX9AA Floor Console

Disconnect the cable from the battery. Remove the heater/air conditioner control and shifter bezel. Remove fasteners from the front and inside of the console. For 2015 models, reconnect the battery, move the seat forward, remove trim covers and bolts from the console. Move the seat back, disconnect the battery again. Remove the console side panels and front mounting screws. Remove the driver's knee bolster. Disconnect any console electrical connectors. Lift and remove the console. Installation is the reverse of removal.

Unplug the cable either from the remote ground connection point or the battery. Take out the knob that controls your heater and air conditioner. Gently pull apart the console storage tray and disconnect its electrical cord. Carefully pry off the shifter bezel. Begin by taking away the two fasteners that are currently holding the front of the center console set in place. On the inside of the console compartment, take out the bolts that attach the back of the center console. Unplug all electrical components attached to the center console. Engage the parking brake. Pull the center console from your vehicle by lifting it from its place. Installation is the reverse of removal.