Jeep 68137495AA Bushing

On earlier models, the transmission is shifted via mechanical rods, rather than a cable. Begin by placing the shift lever into the Park (P) position. Next, remove the center console and, if necessary, take off the protective shield to better expose the shift cable connections. Locate the shift cable on the shift lever assembly, then disconnect it from the shift lever and the shift lever assembly bracket. Remove the shift cable grommet from the floor pan or any retaining nuts holding the grommet in place, if equipped. Raise and support the vehicle on jackstands, then disconnect the shift cable from the transmission shift lever and bracket. Finally, remove the shift cable from the vehicle, and for installation, follow the reverse of the removal process, ensuring to adjust the cable afterward for proper operation.