Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Jeep 83504961 Axle Shaft Rear Left

1987-1995 Jeep 83504961

Customer Questions & Expert Answers (8)
83504961 Mopar Axle Shaft Rear Left Illustration 1 of 1
83504961 Mopar Axle Shaft Rear Left Illustration 1 of 1
  • Part Description
    Rear Model 44
  • Position
    Driver Side
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • 83504961 Axle Shaft Rear Left is Ref No. 1 in the diagram below

    1988 Jeep Wrangler Axle Shaft Rear Left Diagram for 83504961
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number83504961
    Part DescriptionRear Model 44
    Other NamesAxle Shaft
    PositionDriver Side
    ConditionNew
    ManufacturerMopar
    SKU83504961
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1987-1990 Jeep Cherokee4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 4.0L, 6 Cyl 4.2L
    1987-1992 Jeep Comanche4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 4.0L3-Person Cab 2WD, 3-Person Cab 4WD
    1987-1990 Jeep Wagoneer4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 4.0L, 6 Cyl 4.2L
    1987-1995 Jeep Wrangler4 Cyl 2.5L, 6 Cyl 4.0L, 6 Cyl 4.2LSport Utility 4WD

  • Customer Questions & Expert Answers

    Q:
    I would like to check with you if this is the right part Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 83504961 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    What needs to be done with the Axle Shaft before removing the shock absorbers for the 1988 Jeep Cherokee? Posted by Customer
    A:
    Remove the shock absorber lower mounting nuts and compress the shocks to get them out of the way.
    Posted by MoparPartsGiant Specialist
    Q:
    What are the steps involved in removing the brake components and the Axle Shaft, and why is it necessary to hang the brake calipers with wire instead of letting them hang by the brake hose for the 1988 Jeep Comanche? Posted by Customer
    A:
    The steps involve removing the brake calipers, brake pads, anchor plates, and brake discs. The brake calipers should be hung with wire to prevent them from hanging by the brake hose, which could lead to brake hose damage and brake fluid leakage.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done during installation of the Axle Shaft after the removal process for the 1987 Jeep Cherokee? Posted by Customer
    A:
    During installation, the removal process should be reversed. If the intermediate axle was removed, a new gasket should be used on the differential cover. Additionally, the differential housing should be filled with the specified gear lubricant.
    Posted by MoparPartsGiant Specialist
    Q:
    What other suspension components are disconnected, and why are they hung with wire along with the Axle Shaft for the 1987 Jeep Wagoneer? Posted by Customer
    A:
    Other suspension components, such as the stabilizer bar link, tie-rod, center link, lower ends of the shock absorbers, steering dampener, and ABS sensor (if equipped), are disconnected and hung with wire to keep them out of the way and prevent damage during removal.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if the 1988 Jeep Wrangler is equipped with wheel speed sensors and an Axle Shaft? Posted by Customer
    A:
    Remove the wheel speed sensors from the front hubs.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the installation process for the Axle Shaft after removal for the 1990 Jeep Wrangler? Posted by Customer
    A:
    Follow the reverse of the removal process.
    Posted by MoparPartsGiant Specialist
    Q:
    What additional components need to be removed for the Axle Shaft and coil-spring 1995 Jeep Wrangler? Posted by Customer
    A:
    Remove the ABS wheel speed sensors if equipped, disconnect the parking brake cables, and remove the calipers and brake discs. Also, disconnect the vent tube from the axle housing, make match marks on the driveshaft and pinion flange, and remove the driveshaft.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 83504961, the Right Choice

To ensure reliability, purchase Mopar part # 83504961 Axle Shaft Rear Left. It is sometimes referred to as Axle Shaft. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Jeep Cherokee, Comanche, and Wrangler models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 83504961 Axle Shaft Rear Left. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly