Jeep 68079286AA Door Window Regulator

For 2010 and earlier models, begin by removing the door trim panel and water-shield. Next, unbolt the window glass from the regulator, push the glass all the way up, and tape it to the door frame. Then, remove the window regulator-to-door and track mounting fasteners, unplug the electrical connector, and take out the regulator from the door. Installation follows the reverse order of removal. For 2011 and later models, start by removing the door module, then disconnect the electrical connector from the window motor and remove the mounting fasteners. After that, take out the regulator from the door module by removing the mounting fasteners. Installation is again the reverse of removal.