Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Jeep 4793576 Ignition Switch

2001-2002 Jeep 4793576

Customer Questions & Expert Answers (5)
4793576 Mopar Ignition Switch Illustration 1 of 1
4793576 Mopar Ignition Switch Illustration 1 of 1
  • Part Description
    Switch Ignition
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • 4793576 Ignition Switch is Ref No. 6 in the diagram below

    2001 Chrysler PT Cruiser Ignition Switch Diagram for 4793576
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Jeep
    Manufacturer Part Number4793576
    Part DescriptionSwitch Ignition
    Item Dimensions8.9 x 6.1 x 5.4 inches
    Item Weight0.40 Pounds
    ConditionNew
    ManufacturerMopar
    SKU4793576
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2002 Jeep Liberty6 Cyl 3.7LLimited Edition 2WD, Limited Edition 4WD, Renegade 2WD, Renegade 4WD, Sport 2WD, Sport 4WD
    2001-2002 Jeep Wrangler4 Cyl 2.5L, 6 Cyl 4.0LSahara, SE, Sport, X

  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck ? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 4793576 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    How to replace the ignition lock cylinder and ignition switch on the Dodge Neon? Posted by Customer
    A:
    There are few steps needed to perform to replace the ignition switch, the first step is to remove the battery negative cable and then isolate it from the terminal. Pull off the steering column covers and the ignition lock cylinder. Release the electrical connection with the switch of the ignition and remove the Torx head screw fixed on the steering column for the switch. Press the retaining tabs inwards to release the switch and lower it out of the column, if necessary using a screwdriver. When fitting the new switch, physically position the switch to the ON state and align the actuator shaft to be also in the ON position before engaging. The installation process is done in the reverse order in which the removal process was done. However for the lock cylinder it is recommended that you disconnect and isolate the negative cable. Place the ignition key and turn the switch on. Insert a small screwdriver and push on the retainer tab through the hole provided at the lower part of the steering column cover. Remove the ignition lock cylinder from the housing. Align the slot in the ignition switch to the ON position and then place the new ignition lock cylinder till the positioning tab comes under the housing and test the key operation.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the procedure for replacing the Ignition Switch in the 2001 Chrysler PT Cruiser? Posted by Customer
    A:
    Disconnect the cable from the negative terminal of the battery, remove the steering column covers, and detach the screws attaching the right multi-function switch to the mounting bracket.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you install the Ignition Switch for the 2001 Jeep Wrangler? Posted by Customer
    A:
    Installation is the reverse of removal, ensuring the switch slider is moved to the Accessory position, with specific adjustments based on the type of steering column.
    Posted by MoparPartsGiant Specialist
    Q:
    What should I check regarding the Ignition Switch if the key is difficult to turn for the 2002 Jeep Liberty? Posted by Customer
    A:
    If the key is difficult to turn, the issue may not lie with the switch or lock cylinder. In vehicles with automatic transmissions that have floor console-mounted shifters, the Park/Lock cable might require adjustment. If the cable is defective within the steering column, the entire column must be replaced. For manual transmission vehicles, the small button behind the key cylinder could be faulty, necessitating a replacement of the steering column.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 4793576, the Right Choice

To ensure reliability, purchase Mopar part # 4793576 Ignition Switch. It is sometimes referred to as Ignition Lock Assembly, Ignition Switch. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Jeep Liberty and Wrangler models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 4793576 Ignition Switch. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly