Your vehicle deserves only genuine OEM Mopar parts and accessories. To ensure reliability, purchase Mopar part # 52113195AB Bar-Front SWAY. It is sometimes referred to as Mopar Sway Bar Kit. Our Mopar parts and accessories are expedited directly from authorized Mopar dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Mopar parts are the best for restoring your vehicle to factory condition performance. This part fits specific Dodge Durango models.
Affordable, reliable and built to last, Mopar part # 52113195AB Bar-Front SWAY stands out as the smart option. MoparPartsGiant.com is your prime online source with the biggest and best selection of genuine Mopar parts and accessories at giant discounted prices. We have the OEM Mopar parts and accessories you need at the wholesale prices. MoparPartsGiant.com has you covered no matter what type of Mopar vehicle you drive. For detailed Dodge parts information, click here.
Make sure this part fits your vehicle
Mopar 52113195AB Bar-Front SWAY
2006 Dodge Durango 52113195AB
- Part DescriptionBar Front Sway
- PositionFront
- ManufacturerMopar
$191.39 MSRP: $243.55 1
You Save: $52.16 (22%)
52113195AB Bar-Front SWAY is Ref No. 9 in the diagram below
Product Specifications
Brand Genuine Mopar Manufacturer Part Number 52113195AB Part Description Bar Front Sway Other Names Stabilizer Bar Item Dimensions 54.5 x 9.3 x 8.7 inches Item Weight 22.90 Pounds Position Front Condition New Fitment Type Direct Replacement Manufacturer Mopar SKU 52113195AB Shipping & Return Shipping Policy Return Policy Warning: California’s Proposition 65Vehicle Fitment
Year Make Model Engine Important vehicle option details 2006 Dodge Durango 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD
Customer Questions & Answers
- Q:Will this fit my truck? Posted by MoparPartsGiant Specialist
- A:You can Select Your Vehicle to check if 52113195AB fits your vehicle.Posted by MoparPartsGiant Specialist
- Q:How Should the front Stabilizer Bar and Stabilizer Bar bushing Be Installed? Posted by Customer
- A:The manufacturer states that the vehicle must be at curb height when installing the sway bar kit. Remove the upper nut from the sway bar link and separate it from the bar. The sway bar link can be separated from the lower control arm by removing the lower nut on the link. Remove the sway bar bracket fasteners and remove the brackets. Remove the sway bar and the rubber bushings from it. Inspect all rubber bushings for wear and damage. If any of the rubber parts are cracked, torn, or generally deteriorated, replace them. Installation is the reverse of removal. Be sure to tighten all the fasteners to the torque. Tighten the wheel lug nuts to the torque.Posted by MoparPartsGiant Specialist
- Q:How to Remove a rear Stabilizer Bar and Stabilizer Bar bushing on a Dodge Durango? Posted by Customer
- A:To raise the vehicle and support it securely on jackstands, remove the nuts from the sway bar kit link and separate it from the bar. Then, remove the sway bar kit bracket fasteners and brackets. Take out the sway bar kit and remove the sway bar bushings from it. Inspect all sway bar bushings for wear and damage, replacing any that are cracked, torn, or deteriorated. For installation, reverse the removal steps, ensuring all fasteners are tightened to the correct torque. Also, remember to reinstall the parking brake cable bracket (if applicable) and tighten the wheel lug nuts to the specified torque.Posted by MoparPartsGiant Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
Genuine Mopar Part 52113195AB, the Right Choice
Why choose Mopar Parts Giant
- Dedicated Service
Your complete satisfaction is our #1 goal
- Lowest Prices
Best deals on genuine OE parts from dealerships
- Fast Delivery
Orders are processed and delivered promptly