Make sure this part fits

Mopar 68044686AA Stabilizer Bar

2009-2010 Mopar 68044686AA

Customer Questions & Expert Answers (3)
68044686AA Mopar Stabilizer Bar Illustration 1 of 1
  • Part Description
    Stabilizer Bar Front
  • Position
    Front
  • Replaced By
    68070134AA
  • Manufacturer
    Mopar
Make sure this part fits
$238.01 MSRP: $355.00
You Save: $116.99 (33%)
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68044686AA
    Part DescriptionStabilizer Bar; Stabilizer Bar Front
    Item Dimensions46.8 x 10.6 x 6.0 inches
    Item Weight24.30 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU68044686AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2010 Dodge Nitro6 Cyl 3.7L, 6 Cyl 4.0LDetonator 2WD, Detonator 4WD, Heat 2WD, Heat 4WD, SE 2WD, SE 4WD, Shock 2WD, Shock 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD
    2009-2010 Jeep Liberty6 Cyl 3.7LLimited Edition 2WD, Limited Edition 4WD, Renegade 4WD, Sport 2WD, Sport 4WD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck?
    A:
    You can Select Your Vehicle to check if 68044686AA fits your vehicle.
    Posted and answered by Mopar Parts Specialist Daniel
    Q:
    How do you install the Sway Bar Kit for the 2009 Dodge Nitro? Posted by Areli M.
    A:
    To install the stabilizer bar, position the bushings on the bar without using any grease or oil. Push the brackets over the bushings and raise the bar up to the frame, then install the bracket nuts without fully tightening them. Connect the link to the stabilizer bar and the axle, tightening the fasteners to the specified torques. Finally, tighten the bracket bolts to the specified torque and tighten the wheel lug nuts. You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Cristian / Jun 11, 2023
    Q:
    How do you install the Sway Bar Kit and stabilizer bar for the 2009 Jeep Liberty? Posted by Davion M.
    A:
    To install the stabilizer bar, position the bushings on the bar without using any grease or oil. Push the brackets over the bushings and raise the bar up to the frame, then install the bracket nuts without fully tightening them. Connect the link to the stabilizer bar and the axle, tightening the fasteners to the specified torques. Finally, tighten the bracket bolts to the specified torque and tighten the wheel lug nuts. You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Sean / Jul 29, 2025

Genuine Mopar Part 68044686AA, the Right Choice

To ensure reliability, purchase Mopar part # 68044686AA Stabilizer Bar. It is sometimes referred to as Sway Bar Kit. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Dodge Nitro models. It fits Jeep Liberty.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 68044686AA Stabilizer Bar. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.
Shop MoparPartsGiant.com for dedicated service, prompt delivery, and low prices on genuine parts from real OE dealerships.