Mopar 68184746AE Front Hub And Bearing

After raising the vehicle, remove the driveaxle hub nut and washer. Push the driveaxle in until it's free of the hub, which may require tapping with a brass drift punch and hammer. Remove the cotter pin and nut, and use a puller to disconnect the tie-rod end from the steering knuckle. Secure the tie-rod aside with wire. Then, disconnect the brake hose bracket from the strut, remove the caliper and brake pads, and detach the caliper mounting bracket from the steering knuckle. Hang the caliper out of the way with wire.

Rear wheel bearings typically require servicing when changing brake shoes or when the rear of the vehicle is raised. Essential tools for this task include a torque wrench and specialized grease.