Mopar 68029524AA Timing Belt

Remove the bolts to detach the water pump pulley, followed by the crankshaft pulley bolts.

Ensure the TDC mark on the crankshaft timing belt sprocket remains aligned with the stationary index mark on the oil pump housing. Then, turn the exhaust camshaft sprocket clockwise so that its timing mark is slightly below the intake camshaft sprocket timing mark. Install the timing belt starting at the crankshaft sprocket and threading it around the water pump sprocket, idler pulley, camshaft sprockets, and tensioner, taking up tension by moving the exhaust camshaft sprocket counterclockwise until the timing marks on the cam sprockets are realigned.

Install the belt on the crankshaft sprocket first, keeping it tight on the tension side, then install it on the left camshaft sprocket, the water pump pulley, and the right camshaft sprocket and timing belt tensioner, ensuring the timing marks remain aligned.

Carefully slip the timing belt off the sprockets and set it aside, placing it in a plastic bag.