Mopar 52853452AB Transfer Case

Changing a transfer case is something that a do it yourself person can only do with a lot of difficulty owing to the complex geometry of the transfer case assembly which involves a number of small componentry with restricted distance between their corresponding mating surfaces; which in most cases must meet precisely with the use of appropriate spacer or snap rings. While it is a relatively easy repair for any competent mechanic to perform the removal and installation of the transfer case the overhaul is best left for a transmission repair shop because more often than not the time and or the cost outweigh the benefits for a simple overhaul, which can be procured through dealer parts departments or auto parts stores. But even an inexperienced mechanic can successfully rebuild a transfer case if he has proper special tools and proceeds systematically not to miss something. For the overhaul are required: internal and external snap-ring pliers, bearing puller, slide hammer, set of pin punches, dial indicator possibly hydraulic press and a good wooden /metallic work bench and a vise or a trans. It is crucial to record the position and the fastening techniques used for components when disassembling for the record will be valuable during reassembly. Also, knowledge of the transfer case's malfunction zone will help to simplify the inspection and subsequent removal of certain components and assemblies.