Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Mopar 68027598AA Crankshaft Damper

2007-2013 Mopar 68027598AA

Customer Questions & Expert Answers (8)
68027598AA Mopar Crankshaft Damper Illustration 1 of 1
68027598AA Mopar Crankshaft Damper Illustration 1 of 1
  • Part Description
    DAMPER Crankshaft
  • Replaced By
    68027598AB
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • 68027598AA Crankshaft Damper is Ref No. 2 in the diagram below

    2007 Dodge Nitro Crankshaft Damper Diagram for 68027598AA
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68027598AA
    Part DescriptionDAMPER Crankshaft
    Item Dimensions2.7 x 1.8 x 2.8 inches
    Item Weight5.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU68027598AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2013, 2008-2011 Chrysler Town & CountryLimited, LX, Touring, Touring Plus
    2013, 2008-2011 Dodge Grand CaravanCrew, SXT
    2007 Dodge NitroSLT 2WD, SLT 4WD
    2010-2013, 2007-2008 Jeep Wrangler
    2013 Ram C/V

  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck? Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 68027598AA fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    How to remove and install a crankshaft pulley and Harmonic Balancer in 3.7L V6 engine on Dodge Nitro? Posted by Customer
    A:
    Disconnect the cable from the negative terminal of the battery and remove the cooling fans and shroud assembly. Take off the drivebelts and position the belt tensioner away from the crankshaft pulley. Use a strap wrench around the crankshaft pulley to hold it while employing a breaker bar and socket to remove the center bolt; a chain-type wrench may also be used if an old drivebelt or rag is wrapped around the pulley first. Pull the Harmonic Balancer off the crankshaft with a three jaw puller, ensuring the jaws only contact the hub of the pulley and not the outer ring. To prevent damage to the crankshaft threads, screw a long Allen-head bolt into the crankshaft nose for the puller's tapered tip to push against. Check the surface on the pulley hub where the oil seal rides; if it is grooved, a press-on sleeve may be available to renew the sealing surface, which can be pressed into place with a hammer and a block of wood. Lubricate the pulley hub with clean engine oil, align the slot in the pulley with the key on the crankshaft, and push the crankshaft pulley onto the crankshaft as far as it will go, using a Harmonic Balancer installation tool to press it the rest of the way. Install the crankshaft pulley retaining bolt and tighten it to the specified torque, then complete the installation in reverse order of removal.
    Posted by MoparPartsGiant Specialist
    Q:
    How to remove and install a crankshaft pulley and Harmonic Balancer in 3.7L V6 engine on Dodge Nitro? Posted by Customer
    A:
    Disconnect the cable from the negative terminal of the battery and remove the cooling fans and shroud assembly. Take off the drivebelts and position the belt tensioner away from the crankshaft pulley. Use a strap wrench around the crankshaft pulley to hold it while employing a breaker bar and socket to remove the center bolt; a chain-type wrench may also be used if an old drivebelt or rag is wrapped around the pulley first. Pull the Harmonic Balancer off the crankshaft with a three jaw puller, ensuring the jaws only contact the hub of the pulley and not the outer ring. To prevent damage to the crankshaft threads, screw a long Allen-head bolt into the crankshaft nose for the puller's tapered tip to push against. Check the surface on the pulley hub where the oil seal rides; if it is grooved, a press-on sleeve may be available to renew the sealing surface, which can be pressed into place with a hammer and a block of wood. Lubricate the pulley hub with clean engine oil, align the slot in the pulley with the key on the crankshaft, and push the crankshaft pulley onto the crankshaft as far as it will go, using a Harmonic Balancer installation tool to press it the rest of the way. Install the crankshaft pulley retaining bolt and tighten it to the specified torque, then complete the installation in reverse order of removal.
    Posted by MoparPartsGiant Specialist
    Q:
    How do you prevent the crankshaft from turning while removing the Harmonic Balancer for the 2010 Dodge Grand Caravan? Posted by Customer
    A:
    Remove the driveplate cover and use a large screwdriver in the ring gear teeth to prevent the crankshaft from turning.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done after disconnecting the battery for the 2009 Dodge Grand Caravan, especially regarding the Crankshaft Pulley? Posted by Customer
    A:
    Loosen the lug nuts on the right front wheel.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the Crankshaft Pulley be installed for the 2012 Jeep Wrangler? Posted by Customer
    A:
    Use a special installation tool that threads to the crankshaft in place of the crankshaft pulley bolt.
    Posted by MoparPartsGiant Specialist
    Q:
    How should the 2012 Jeep Wrangler be positioned for the Harmonic Balancer procedure? Posted by Customer
    A:
    Raise the vehicle and support it securely on jackstands.
    Posted by MoparPartsGiant Specialist
    Q:
    What should be done if a groove is worn in the hub of the Harmonic Balancer for the 2008 Jeep Wrangler? Posted by Customer
    A:
    Replace the vibration damper or install a special sleeve to restore the contact surface.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 68027598AA, the Right Choice

To ensure reliability, purchase Mopar part # 68027598AA Crankshaft Damper. It is sometimes referred to as Crankshaft Pulley, Harmonic Balancer. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler Town & Country models. It fits Dodge Grand Caravan, Nitro. It also fits Jeep Wrangler. This also fits Ram C/V.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 68027598AA Crankshaft Damper. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly