Mopar 52027883AC Fan-Fan

You can Select Your Vehicle to check if 52027883AC fits your vehicle.

For belt-driven fans, perform the following checks: Disconnect the negative battery cable and check for excessive bearing play by rocking the fan back and forth by hand. When the engine is cold, turn the fan blades by hand to ensure they turn freely. Visually inspect the clutch assembly for substantial leakage, and if any issues are found, replace the clutch assembly. With the engine completely warmed up, turn off the ignition and disconnect the negative battery cable, then turn the fan by hand to check for proper drag; if the fan turns too easily, replace the fan clutch. To remove the fan clutch assembly, disconnect the negative battery cable and remove the fan shroud mounting screws, then lift the fan/clutch assembly out of the engine compartment. Carefully inspect the fan blades for damage and replace the fan if necessary. The fan clutch can be unbolted from the fan at this point if needed. For electric fans on V6 engines, first check the fuse and then unplug the electrical connector for the fan motor and apply battery voltage to test the fan. If the fan motors, fuse, and relay are functional but the fan is not working, check all wiring and connections to the fan motor and have the cooling fan system diagnosed by a qualified repair shop if no obvious issues are found. To remove the electric fan, drain the cooling system and remove the upper radiator hose and coolant reservoir. Disconnect the fan electrical connector, remove the mounting fasteners, and then remove the fan assembly. Installation is the reverse of removal, ensuring the fan assembly fasteners are tightened securely.