Mopar 68091521AA Front Upper Bumper Cover

The first step to taking out the front bumper cover is to locate the electrical connector for the horn and then disconnect it and then un-bolt it from the vehicle. Then, unplug the ambient air temperature sensor placed at the central part of the bumper under side and remove any clips connected to the bumper to the harness. Then disconnect the bolts that fastens the bumper to frame from both of the sides. For the rear, open the lift gate and remove the rear bumper cover and then the nuts which hold the rear bumper to the frame. Installation of both the front and rear bumpers is as follows: the procedure is actually the reverse of the above removal process.