Mopar 4797777AC Filter-Air

You can Select Your Vehicle to check if 4797777AC fits your vehicle.

At the specified intervals, the air filter and, if equipped, PCV filter should be replaced with new ones. The engine air cleaner also supplies filtered air to the PCV system. The filter on carburetor-equipped models is located on top of the carburetor and is replaced by unscrewing the wing nut from the top of the filter housing body, disconnecting the clips and lifting off the cover. On carbureted models, remove the air cleaner wing nut, disconnect the clips, lift the cover off and remove the filter element. On most fuel-injected models, the filter is located in a housing in the engine compartment. It can be replaced after disengaging the clips holding the top plate in place. Clips on the sides hold the cover on the air cleaner housing - they can be pried loose with a screwdriver. While the top plate is off, be careful not to drop anything into the carburetor or air cleaner assembly. Lift the air filter element out, hold the cover up out of the way and lift the filter element out of the housing, then wipe out the inside of the air cleaner housing with a clean rag. Place the new filter in the air cleaner housing, making sure it seats properly in the bottom of the housing. The PCV filter is also located inside the air cleaner housing on some models. Remove the cover and air filter as previously described, then locate the PCV filter on the inside of the housing. Remove the old filter. Install the new PCV filter and the new air filter. Finally, install the cover and any hoses which were disconnected.