Mopar 55079111AA Radiator Grille

For 2007 and earlier models, begin by removing the four top mounting screws or clips that secure the grille. Next, pull the grille forward and release the hooks at the bottom by swinging it down. Installation follows the reverse order of removal. For 2008 and later models, start by removing the hood latch and the plastic push pins that secure the top of the grille to the radiator support. Then, take out the bumper stops. Using a plastic trim tool, disengage the hooks from the upper corners of the grille, located just above the headlights, followed by disengaging the six hooks along the bottom edge of the grille to remove it. For Nitro models, pull the grille forward enough to disconnect the electrical connector to the lamps. If replacing the grille, also remove the front lamp assembly fasteners and take out the lamp assemblies from the grille. Finally, installation is the reverse of removal.