Make sure this part fits

Mopar 55000767 Drivers Left Front Door Lock Actuator

1984-1996 Mopar 55000767

Customer Questions & Expert Answers (4)
55000767 Mopar Drivers Left Front Door Lock Actuator Product Photo 1 of 2
  • Part Description
    Latch-Door-Lh ; Latch, Front Door, Right
  • Position
    Driver Side
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number55000767
    Part DescriptionLatch-Door-Lh ; Latch, Front Door, Right
    Other NamesLock
    Item Dimensions5.3 x 3.3 x 2.8 inches
    Item Weight1.80 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU55000767
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1984-1996 Jeep Cherokee4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 4 Cyl 2.5L Diesel, 6 Cyl 2.8L, 6 Cyl 4.0L, 6 Cyl 4.2L2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 2 Door Sport Utility RHD 2WD, 2 Door Sport Utility RHD 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD
    1986-1992 Jeep Comanche4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.0L3-Person Cab 2WD, 3-Person Cab 4WD
    1984-1990 Jeep Wagoneer4 Cyl 2.1L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.0L, 6 Cyl 4.2L
  • Customer Questions & Expert Answers

    Q:
    Please cross check for fit. Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 55000767 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    How to remove and install the Door Handle, Door Latch Assembly, and Door Lock Cylinder on a Jeep Comanche? Posted by Customer
    A:
    Remove the door trim panel and water shield. Remove the door window glass. Remove the access plug in the end of the door. Remove the three door latch retaining screws from the end of the door, disconnect the links, then remove the latch and solenoid. On power door locks, it will be necessary to drill out the rivets retaining the solenoid to the door. Installation is the reverse of removal. Tighten the door latch retaining screws securely. Disconnect the link from the lock cylinder. Use pliers to slide the retaining clip off and remove the lock cylinder from the door. Installation is the reverse of removal. After installation, check the latch link free play by pressing the door handle release button in. Check that the latch link starts to move after the button moves about 1/64-inch. If necessary, loosen the adjusting screw on the latch, adjust the free play and then retighten it. Remove the retaining nuts, pull the handle out, detach the control rod and remove the handle from the door. Installation is the reverse of removal. Tighten the retaining nuts securely.
    Posted by MoparPartsGiant Specialist
    Q:
    How to remove and install the door handle, door latch assembly, and door lock cylinder on a Jeep Wagoneer? Posted by Customer
    A:
    Remove the door trim panel and water shield. Remove the door window glass. Remove the access plug in the end of the door. Remove the three door latch retaining screws from the end of the door, disconnect the links, then remove the latch and solenoid. On power door locks, it will be necessary to drill out the rivets retaining the solenoid to the door. Installation is the reverse of removal. Tighten the door latch retaining screws securely. Disconnect the link from the lock cylinder. Use pliers to slide the retaining clip off and remove the lock cylinder from the door. Installation is the reverse of removal. After installation, check the latch link free play by pressing the door handle release button in. Check that the latch link starts to move after the button moves about 1/64-inch. If necessary, loosen the adjusting screw on the latch, adjust the free play and then retighten it. Remove the retaining nuts, pull the handle out, detach the control rod and remove the handle from the door. Installation is the reverse of removal. Tighten the retaining nuts securely.
    Posted by MoparPartsGiant Specialist
    Q:
    What is the first step in the process of removing the Door Latch Assembly and solenoid for the 1989 Jeep Cherokee? Posted by Customer
    A:
    The first step is to remove the door trim panel and water shield.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 55000767, the Right Choice

To ensure reliability, purchase Mopar part # 55000767 Drivers Left Front Door Lock Actuator. It is sometimes referred to as Door Lock Actuator, Door Latch Assembly. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Jeep Cherokee, Comanche, and Wagoneer models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 55000767 Drivers Left Front Door Lock Actuator. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly