Make sure this part fits

Mopar 68004095AB Module

2009-2011 Mopar 68004095AB

Customer Questions & Expert Answers (3)
68004095AB Mopar Module Product Photo 1 of 3
  • Part Description
    Module - Fuel Pump/Level Unit
  • Replaced By
    68004095AE
  • Manufacturer
    Mopar
Make sure this part fits
$537.90 MSRP: $814.00
You Save: $276.10 (34%)
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number68004095AB
    Part DescriptionModule; Module - Fuel Pump/Level Unit
    Item Dimensions7.5 x 10.9 x 14.0 inches
    Item Weight4.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU68004095AB
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009-2011 Dodge Nitro6 Cyl 3.7L, 6 Cyl 4.0LDetonator 2WD, Detonator 4WD, Heat 2WD, Heat 4WD, SE 2WD, SE 4WD, Shock 2WD, Shock 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD
    2009-2011 Jeep Liberty6 Cyl 3.7LLimited Edition 2WD, Limited Edition 4WD, Renegade 4WD, Sport 2WD, Sport 4WD
  • Customer Questions & Expert Answers

    Q:
    Will this fit my truck?
    A:
    You can Select Your Vehicle to check if 68004095AB fits your vehicle.
    Posted and answered by Mopar Parts Specialist Daniel
    Q:
    How do you proceed to remove the Fuel Pump module for the 2010 Dodge Nitro? Posted by Khizir A.
    A:
    Start by removing the access cover nuts. Cut the seal with a knife blade or apply heat to the outer edge of the access cover using a heat gun. Carefully pry up on the cover to remove it. Clean the area around the fuel lines and upper section to prevent dirt from entering the fuel system. Disconnect the fuel lines and electrical connector from the upper module if needed. Mark the orientation of the module to the fuel tank before removal. You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Stephen / May 18, 2026
    Q:
    What should be done to check the fuel pressure for the 2011 Jeep Liberty's Fuel Pump? Posted by Brandin H.
    A:
    Relieve the fuel pressure, remove the cap from the fuel pressure test port on the fuel rail and attach a fuel pressure gauge. Start the engine and check the pressure on the gauge. If the pressure is not within specifications, check for a restriction in the fuel system if the pressure is lower than specified. If the pressure is higher than specified, replace the fuel pressure regulator. You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Sean / Mar 05, 2025

Genuine Mopar Part 68004095AB, the Right Choice

To ensure reliability, purchase Mopar part # 68004095AB Module. It is sometimes referred to as Fuel Pump, Fuel Level Sensor, Fuel Sending Unit. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Dodge Nitro models. It fits Jeep Liberty.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 68004095AB Module. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.
Shop MoparPartsGiant.com for dedicated service, prompt delivery, and low prices on genuine parts from real OE dealerships.