Your vehicle deserves only genuine OEM Mopar parts and accessories. To ensure reliability, purchase Mopar part # 4856107 Throttle Body. It is sometimes referred to as Mopar Throttle Body. Our Mopar parts and accessories are expedited directly from authorized Mopar dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Mopar parts are the best for restoring your vehicle to factory condition performance. This part fits specific Jeep Cherokee, Grand Cherokee, Wrangler models.
Affordable, reliable and built to last, Mopar part # 4856107 Throttle Body stands out as the smart option. MoparPartsGiant.com is your prime online source with the biggest and best selection of genuine Mopar parts and accessories at giant discounted prices. We have the OEM Mopar parts and accessories you need at the wholesale prices. MoparPartsGiant.com has you covered no matter what type of Mopar vehicle you drive. For detailed Jeep parts information, click here.
Make sure this part fits your vehicle
Mopar 4856107 Throttle Body
1994-1997 Mopar 4856107
- Part DescriptionThrottle Body, w/A.I.S. and T.P.S.
- ManufacturerMopar
- Manufacturer's NotesThis part is discontinued.
4856107 Throttle Body is Ref No. 1 in the diagram below
Product Specifications
Brand Genuine Mopar Manufacturer Part Number 4856107 Part Description Throttle Body, w/A.I.S. and T.P.S. Item Dimensions 8.7 x 8.5 x 4.2 inches Item Weight 2.00 Pounds Condition New Fitment Type Direct Replacement Manufacturer Mopar SKU 4856107 Warranty This genuine Mopar part is guaranteed by Mopar's factory warranty. Shipping & Return Shipping Policy Return Policy Warning: California’s Proposition 65Vehicle Fitment
Year Make Model Engine Important vehicle option details 1994-1996 Jeep Cherokee 4 Cyl 2.5L, 4 Cyl 2.5L Diesel, 6 Cyl 4.0L 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 2 Door Sport Utility RHD 2WD, 2 Door Sport Utility RHD 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD 1994-1996 Jeep Grand Cherokee 6 Cyl 4.0L, 8 Cyl 5.2L 2WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4WD 1997, 1994-1995 Jeep Wrangler 4 Cyl 2.5L, 6 Cyl 4.0L SE, Sport Utility 4WD
Customer Questions & Answers
- Q:This part will not fit my vehicle. Can you provide me with the part number for the bracket that will fit? TN. Posted by MoparPartsGiant Specialist
- A:You can Select Your Vehicle to check if 4856107 fits your vehicle.Posted by MoparPartsGiant Specialist
- Q:What should you do after disconnecting components and wires from the throttle body for the 1995 Jeep Cherokee? Posted by Customer
- A:After disconnecting components and wires from the throttle body, you should:a. Remove the mounting bolts.b. Remove the throttle body and gasket.c. Discard the old gasket.d. Clean the mating surfaces on the throttle body and intake manifold.Posted by MoparPartsGiant Specialist
- See expert answers on similar Throttle Body
- Q:What should you do if you are replacing the throttle body assembly for the 1994 Jeep Cherokee? Posted by Customer
- A:Remove the ISA motor and throttle position sensor.- Install them on the replacement throttle body and adjust them.Posted by MoparPartsGiant Specialist
- See expert answers on similar Throttle Body
- Q:What are some possible causes of a vacuum leak in the carburetor or throttle body for the 2014 Jeep Wrangler? Posted by Customer
- A:The fasteners attaching the carburetor or throttle body to the intake manifold can work loose from vibration and temperature changes during engine operation, causing a vacuum leak.Posted by MoparPartsGiant Specialist
- See expert answers on similar Throttle Body
- Q:What steps are involved in removing components from the throttle body for the 2012 Jeep Wrangler? Posted by Customer
- A:Detach the vacuum hoses from the throttle body upper bonnet. Release the mounting clips and remove the upper bonnet. Remove the three mounting nuts and lift off the lower bonnet. Remove the gasket from the rim of the throttle body.Posted by MoparPartsGiant Specialist
- See expert answers on similar Throttle Body
- Q:How should you initiate the process of working on the fuel body for the 1988 Jeep Wrangler? Posted by Customer
- A:Detach the cable from the negative battery terminal.Posted by MoparPartsGiant Specialist
- See expert answers on similar Throttle Body
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
Genuine Mopar Part 4856107, the Right Choice
Why choose Mopar Parts Giant
- Dedicated Service
Your complete satisfaction is our #1 goal
- Lowest Prices
Best deals on genuine OE parts from dealerships
- Fast Delivery
Orders are processed and delivered promptly