Genuine Jeep Gladiator Hitches & Towing

Fits 2 Hitch Receiver, with Jeep Logo"

Production exterior manual mirror kit. Kit includes two manual exterior rear view mirrors with Black housing. Does not work with tube doors or doors-off options.

Electric Locker Wiring Harness is 20 feet long and has a two-wire connector. Power and ground is provided with the switch. This harness allows front or rear locking axle to be powered.

Black lug nut kit comes with a set of four lug nuts. For a vehicle with a five lug nut pattern, must order 5 kits. For a vehicle with six lug nut pattern, must order six kits.

Trailer Hitch Ball is forged steel with a Chrome finish. This 2 diameter ball has a 1" diameter shank and is rated to handle 6,000 lbs. Refer to your owner's manual for vehicle-specific load ratings."

Ball Mount Adapter is designed for a 2 Hitch Receiver and allows a 0.75" rise or 2" drop in ball position. The adapter features a 1" ball shank, is 8.5" long and is rated to handle up to a 7,500 lb load and 750 lb of tongue weight."

Fits 2 Hitch Receiver, with Mopar logo"

Ball Mount Adapter is designed for a 2 Hitch Receiver and allows a 2.75" rise or 4" drop in ball position. The adapter features a 1" ball shank, is 9" long and is rated to handle up to a 6,000 lb load and 600 lb of tongue weight."

Trailer Hitch Ball is forged steel with a Chrome finish. This 1-7/8 diameter ball has a 1" diameter shank and is rated to handle 3,500 lbs. Refer to your owner's manual for vehicle-specific load ratings."

Ball Mount Adapter is designed for a 2 Hitch Receiver and allows a 4.75" rise or 6" drop in ball position. The adapter features a 1" ball shank, is 9.5" long and is rated to handle up to a 6,000 lb load and 600 lb of tongue weight."

Trailer Tow Wiring Adapter converts seven-way round connector to four-way flat connector.

Proportional Trailer Brake Controller for automatic or manual trailer brake activation. Handles trailers with up to three (3) axles.

Upgrade your bumper mounted Class II towing capacity to a Class IV 2 Hitch Receiver (same as what's found on production vehicles). It has a 7,650 lb. towing capacity when properly equipped and requires no trimming or cutting of the rear bumper or fascia when installing. NOTE: Trailer Tow Wiring Harness purchase not required. Harness is included in production build. NOTE: Do not exceed the maximum recommended tow ratings per your owner's manual."