Trailer Tow Wire Harness Kit, with 7-way round trailer connector, plugs directly into the vehicle wiring, no splicing required.
Hitch Receiver, 2.0- inch opening, 2,000 lb. rating. Fits Trailhawk vehicles only. This kit requires replacement of lower fascia designed for use with a hitch receiver. For Trailhawk order 68352700AA.
Jet Black (RXF)
Trailer Tow Wiring Harness includes seven-way and four-way trailer connections. Wiring supports trailer traffic lighting stop, turn, reverse, and park. Kit includes harness, module, and 4/7-way adapter.
Wiring Kit to enable Hard Top installation on vehicles equipped with production Soft Top and heated steering wheel.Kit includes multifunction switches, HVAC control, dual outlet washer pump, washer hose connector kit, check valve, and wiring harness with washer hose.Fits Jeep Wrangler (JL) equipped with production soft top and heated steering wheel.
'3,500-lb tow rating, 350-lb tongue weight rating, 2.0 opening. 6-cylinder LWB Wrangler. Includes 7-way wiring connector mount. Includes receiver plug. Ball mount and hitch ball sold separately.'"
Production Class III Trailer Hitch with 2" Receiver Opening. Non-Trailhawk models need to add Hitch Receiver Bezel 82214562.
'Trailer Tow Wire Harness Kit, with 7-way round trailer connector, plugs directly into the vehicle wiring, no splicing required, must use dealer scan tool to activate'
Engine oil cooler Kit - CVT Vehicles built prior to November 2009. (with external CVT oil cooler)
Hitch Receiver, 2.0- inch opening, 2,000 lb. rating. Fits non-Trailhawk vehicles only. This kit requires replacement of lower fascia designed for use with a hitch receiver. For Sport and Latitude order 68352635AA, for Limited order 68352692AA.
Hitch Receivers help maximize your vehicle's capability. This Class 2 Hitch Receiver has a 3,500 lb. towing capacity with 350 lb. tongue weight capacity. It requires no trimming or cutting of the rear bumper or fascia when installing and is the same as the production hitch. The Jeep Hitch Cover is also included. Fits Jeep Wrangler (JL).
3,500-lb tow rating, 350-lb tongue weight rating, 1 1/4 opening. Ball Mount Adapter and Hitch Ball sold separately. Also order bezel 82209527 (Commander) or 82208986 (Grand Cherokee)."
Trailer Tow Wiring Harness, includes seven-way and four-way trailer connectors and lamp module using inputs from brake lamp and turn signal lamp
Hitch Receiver, 2.0- inch opening, 2,000 lb. rating. Fits Trailhawk vehicles only. This kit requires replacement of lower fascia designed for use with a hitch receiver. For Trailhawk order 68352700AA.
Electric Locker Wiring Harness is 20 feet long and has a two-wire connector. Power and ground is provided with the switch. This harness allows front or rear locking axle to be powered.
Hitch receiver bezel covers cutting edge after fascia is cut for access to hitch receiver opening. Fits 2014-2018 Jeep Cherokee (not Trailhawk). Works with hitch receiver 82213349AD.
7-way to Wrangler body harness
Production Class IV Hitch Receiver includes trim bezel. Note: SRT® -8 models also require 68157472AA trim bezel, order separately. 2014-2017 (and some 2018) Jeep Grand Cherokee vehicles come equipped with wiring harness from production (additional wiring harness not needed). However, order snap-in 7/4-way connector 56055632AC. Once installed, dealer must use their scan tool to add hitch sales code to activate trailer wiring. Some 2018 Jeep Grand Cherokee vehicles to do not come equipped with wiring harness or PDC to support towing. A separate kit will be required.
Complete Harness, 7-way round trailer connector, plugs directly into the vehicle wiring
Production Class IV Trailer Hitch, includes Trim Bezel. Note: SRT® -8 models also require 68157472AA trim bezel order separately. 2014 Grand Cherokee vehicles come equipped with wiring harness from production (additional wiring harness not needed). Howeve